Overview
The Pro Comp Pro Runner SS part ZX2002 is a monotube strut-style shock absorber for late-model trucks and SUVs with independent front coilover strut suspensions. Its ride height adjustable collar raises the front up to 1.75 inches, or keeps factory height, and it is designed to clear 32 inch tires.
The collar uses a patent-pending 180 degree SS design for height adjustment. The shock is nitrogen charged, and its body has a zinc plated, clear-coated finish. The factory coil spring is retained, and a new coil spring is not included.
Key features
- Height adjustable collar, up to 1.75 in. of lift
- Designed to clear 32 in. tires
- Factory coil spring retained; no new spring included
- Nitrogen charged monotube body
- Zinc plated, clear-coated finish
Strut shock setup and wear
On a coilover strut, the shock and spring form one assembly, so the shock is only one part of how the front end is controlled. When a strut shock wears, the front can bounce after a dip, dive hard under braking, or feel loose on washboard gravel. Because the spring stays in place on this unit, the old spring should be checked for sag and cracks at the same time, since a tired spring changes how the new shock loads.
Raising a strut with a collar changes front ride height, which can alter camber and caster. Have the alignment checked after the height is set, and look at the brake lines and CV axle angles for stretch or binding. Strut mounts, bearing plates and bump stops are often replaced with the shock when the vehicle has high mileage or off-road use.
- Inspect the strut mount and bearing plate for play
- Check the bump stop for cracks before reinstalling
- Recheck collar settings after the first few drives
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | ZX2002 |
| UPC | 614901024012 |
| Shock series | Pro Runner SS monotube |
| Ride height adjustment | Up to 1.75 in., or factory height |
| Tire clearance | 32 in. |
| Coil spring | Factory spring retained; new spring not included |
| Charge | Nitrogen |
| Finish | Zinc plated, clear coated |
Vehicle fitment
It is engineered for late-model trucks and SUVs with coilover strut-style independent front suspensions. Check fit against your vehicle’s year, model and trim before ordering.
Installation notes
The factory coil spring stays in place and is not included, so keep the existing spring when fitting this shock.
What’s included
One Pro Runner SS monotube shock with its height adjustable collar. The coil spring is not included.








































