Overview
The Pro Comp ES3000 Series rear shock, part number 329505, fits the 2002 to 2006 Chevrolet Avalanche 2500 and the 2004 to 2006 Chevrolet Silverado 2500 HD. It is rated for a 6 in. lift, and its extended, collapsed and travel lengths are vehicle specific.
It is a twin-tube, gas-charged shock with 10-stage velocity-sensitive valving. The chrome-hardened 5/8 inch piston rod and the Teflon rebound stop are the same as the rest of the ES3000 line, so the main difference between part numbers is the length and mount fit.
The 329505 is one of the larger ES3000 units in this range, so measure its mounting distance and compare the vehicle-specific lengths with the original shock before ordering.
Key features
- 10-stage velocity-sensitive valving.
- A 5/8 inch chrome-hardened piston rod.
- A Teflon rebound stop.
- Double-welded shock mounts.
- The shock is covered by Pro Comp’s limited lifetime warranty.
Lift height and suspension geometry
Raising a heavy-duty truck changes the angle of the suspension links and the distance the shock must cover. As the truck is raised, the shock typically reaches farther at full droop, so the working range of the unit becomes more important than its length alone. Checking the mounts at full extension before final tightening helps avoid a shock that bottoms out or stretches its mounting hardware.
Heavy-duty trucks also carry more weight, so the bushings and mounts take a larger share of each compression. Inspecting these parts during a shock swap is a sensible step, and replacing worn bushings at the same time keeps the new unit from working against a loose mount. Tow loads and off-road use both increase that stress.
- Check mount clearance at full extension
- Inspect bushings and mount bolts
- Recheck torque after the first drives
- Consider the full working range, not length alone
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 329505 |
| UPC | 614901698558 |
| Shock series | ES3000 |
| Extended length | Vehicle specific |
| Collapsed length | Vehicle specific |
| Travel length | Vehicle specific |
| Upper mount | Factory |
| Lower mount | Factory |
| Position | Rear |
| Lift rating | 6 in. lift |
| Adjustable | No |
| Finish | White |
| Dust boot included | No |
| Sold as | Each |
Vehicle fitment
It fits 2002 to 2006 Chevrolet Avalanche 2500 models and 2004 to 2006 Chevrolet Silverado 2500 HD trucks, and it is rated for a 6 in. lift on both. Confirm fit for your vehicle’s year, model and trim before buying.
The list does not include the Silverado 2500 HD before 2004 or the GMC Sierra 2500 HD. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
With a 6 in. lift, check that the factory mounts still line up with the shock at full extension before you tighten the hardware. Vehicle-specific lengths mean the old shock is the most reliable reference.
What’s included
One ES3000 shock absorber.
Not included: a dust boot, so buy one separately if your application uses one.












