Overview
The Pro Comp Pro Runner ZX2031 is a rear gas-charged monotube shock absorber designed for a 4 to 5 inch lift. It is intended for use with the Pro Comp Lift K1085, and it fits the 2011 to 2013 Chevrolet Silverado 2500 HD and the 2011 to 2013 GMC Sierra 2500 HD.
The shock is built around vehicle-specific ride tuning and multi-stage valving, which Pro Comp says were developed through dyno and real-world testing. A monotube shock keeps the damping oil and nitrogen gas in one tube, separated by a floating piston. The brushed and zinc plated body is intended to limit cavitation and let heat leave the shock more readily.
Key features
- Rear placement for a 4 to 5 inch lift
- Intended for use with the Pro Comp Lift K1085
- Multi-stage valving
- Nitrogen gas charge with a zinc plated, clear coated body
Working with a rear lift
A rear lift raises the axle and changes how the rear shocks sit between the frame and the axle. The shock sees a different angle and a different part of its stroke, so the lift height and the shock design should be chosen together rather than separately.
Heavy-duty trucks often carry loads over the rear axle, and that load keeps the shock working for longer periods. How long a rear shock lasts depends on the terrain, the load and how often the truck is driven hard. Inspecting the body, boot and mounts at regular intervals catches wear before it affects control.
- Check the rear track bar after a lift
- Inspect the boot and body for oil or grit
- Match the rear shocks to each other
- Re-check mount bolts after the first few drives
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | ZX2031 |
| UPC | 614901024340 |
| Shock series | Pro Runner monotube |
| Position | Rear |
| Lift height | 4 to 5 in. |
| Compatible lift kit | Pro Comp Lift K1085 |
| Gas charged | Yes, nitrogen |
| Finish | Zinc plated, clear coated |
Vehicle fitment
It fits the 2011–2013 Chevrolet Silverado 2500 HD and the 2011–2013 GMC Sierra 2500 HD.
Other Silverado and Sierra years, and 1500 or 3500 models, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The listed lift is 4 to 5 inches, so confirm your truck’s lift and the K1085 kit before fitting this rear shock, since the listed lift range is specific to this part.
What’s included
One rear monotube shock.













































