Overview
The Pro Comp ES3000 Series shock absorber, part number 329506, is a factory-mount replacement with vehicle-specific lengths. Because the lengths vary by vehicle, the shock should be checked against the original on your truck.
The shock is a twin-tube, gas-charged design. It uses 10-stage velocity-sensitive valving, a 5/8 inch chrome-hardened piston rod, and a Teflon rebound stop that controls the end of the return stroke. These internal features match the rest of the ES3000 range.
Key features
- 10-stage velocity-sensitive valving.
- A 5/8 inch chrome-hardened piston rod.
- A Teflon rebound stop.
- Double-welded mounts for strength at the attachment points.
- Limited lifetime warranty coverage applies to this shock.
Mount geometry and clearance
Factory mounts are designed to hold a shock in a specific position, so the geometry around them matters as much as the damping inside. Before installing, look at how the eye or stud sits relative to the axle or frame and whether the body or brake lines could touch the shock at full compression. Clearance problems are easier to fix before the old unit is removed.
Shocks wear through their seals and bushings, and a replacement is often the moment to inspect the surrounding parts. Look for cracked rubber, rust on the mount plates, and worn fasteners. Keeping the factory hardware in good condition helps a new shock perform as intended for the long run.
- Check clearance at full compression
- Inspect rubber bushings for cracks
- Look for rust on mount plates
- Replace worn fasteners before installing
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 329506 |
| UPC | 614901042795 |
| Shock series | ES3000 |
| Extended length | Vehicle specific |
| Collapsed length | Vehicle specific |
| Travel length | Vehicle specific |
| Upper mount | Factory |
| Lower mount | Factory |
| Adjustable | No |
| Remote reservoir | No |
| Body type | Hydraulic, gas charged |
| Finish | White |
| Dust boot included | No |
| Sold as | Each |
Vehicle fitment
Measure the shock you are replacing and confirm it matches your vehicle’s year, model and trim before ordering.
Vehicle-specific lengths mean the shock must be matched to the individual truck. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Compare the factory mounting points on your truck with the shock before installing it, and check that the length at full extension clears the body and frame.
What’s included
One ES3000 shock absorber.
Not included: the dust boot, which is not part of this shock.






