Overview
The Pro Comp Pro Runner ZX2028 is a rear gas-charged monotube shock absorber with loop-style upper and lower mounts. It fits the 2009–2010 Dodge Ram 1500 and the 2011–2015 Ram 1500, and it covers a lift of 0 to 1.5 inches. It measures 26.46 inches extended, 16.58 inches collapsed and 9.60 inches of travel.
The Pro Runner line was developed for late-model trucks, Jeeps and SUVs, with vehicle-specific ride tuning and multi-stage valving. The brushed, zinc plated and clear coated body is nitrogen charged to reduce cavitation during compression and rebound, and the charge helps the body dissipate heat and resist shock fade.
The extended length of 26.46 in. and collapsed length of 16.58 in. give 9.60 in. of travel. The lift range is 0 to 1.5 inches, and loop-style mounts at both ends mean the shock suits one mounting pattern, so pair it with a shock that uses the same mounts.
Key features
- Rear placement for Ram 1500 trucks
- Loop upper and lower mounts
- Multi-stage valving
- Nitrogen charged with a zinc plated finish
- Boot included
How the body handles heat
Heat is the main enemy of a shock absorber. When the oil gets hot, its viscosity drops and the damping can soften, which is why a shock may feel fine on the first drive and worn after a long descent. A body that sheds heat well helps keep the ride consistent over longer use.
A nitrogen-charged monotube keeps the oil under pressure, which limits foaming and keeps the piston working in a steadier fluid. Drivers who use a half-ton for towing or frequent gravel roads will notice this most. Keep the mounts clean and free of mud packed around the bushings so heat can leave the body.
- Keep the body clear of mud and debris
- Inspect the boot after rough off-road use
- Check loop bushings at each tire rotation
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | ZX2028 |
| UPC | 614901024319 |
| Shock series | Pro Runner |
| Position | Rear |
| Lift height | 0 to 1.5 in. |
| Extended length | 26.46 in. |
| Collapsed length | 16.58 in. |
| Travel | 9.60 in. |
| Upper and lower mounts | Loop |
| Adjustable | No |
| Finish | Zinc plated, clear coated |
| Boot included | Yes |
Vehicle fitment
It fits the 2009–2010 Dodge Ram 1500 and the 2011–2015 Ram 1500.
Ram 1500 model years outside 2009–2015, and Ram 2500 and 3500 models, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm the 0 to 1.5 inch lift range against your truck, and check that the loop mounts on both ends match the existing rear shock.
What’s included
One rear monotube shock, with its boot.



























