Overview
The Pro Comp ES9000 part 932046 is a gas-charged shock absorber with factory upper and lower mounts. Its listed extended length is 32.83 inches, its collapsed length is 18.82 inches, and its travel is 14.01 inches.
The ES9000 is built for heavier loads and demanding driving conditions, and it is intended for drivers who need a shock that handles that work.
The shock has a twin-tube body with 10-stage velocity-sensitive valving and a 1 3/8 inch nylon-banded piston head. The piston head is full-displacement, and the shock mounts are double-welded for durability.
Key features
- Gas-charged twin-tube body
- 10-stage velocity-sensitive valving
- Nylon-banded, full-displacement piston head
- Double-welded mounts
Heavy-duty use and maintenance
Shocks used for heavier loads or demanding driving work harder and tend to heat up sooner. Heat can thin the damping oil and reduce control, so a shock that feels firm one season may feel soft the next. Keeping the mounts tight and the body clean makes it easier to spot leaks or damage early.
Because the truck’s load and driving style matter, inspect the shocks regularly and replace them in pairs. Look at the rubber bushings, bracket welds and fasteners, and check that the shock is not rubbing on the frame or springs. A shock that bottoms out often may be worn, overloaded or too short for the lift.
- Look for oil on the body
- Check welds and brackets
- Replace worn bushings
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 932046 |
| UPC | 614901932041 |
| Shock series | ES9000 |
| Extended length | 32.83 in. |
| Collapsed length | 18.82 in. |
| Travel | 14.01 in. |
| Gas charged | Yes |
| Piston head | 1 3/8 in., nylon-banded, full displacement |
| Upper and lower mounts | Factory |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
Vehicle fitment
Confirm fit for your vehicle’s year, model, trim and mounting position before ordering.
Installation notes
Measure the shock being replaced first, and confirm the vehicle, position and lift before installing.
What’s included
A single gas-charged shock is supplied, with no boot.









