Overview
The Pro Comp Pro Runner SS part ZX2014 is a nitrogen-charged shock for late-model trucks and SUVs with coilover strut-style independent front suspensions. Its height adjustable collar raises the front up to 2.75 inches to clear 35 inch tires, or it can be left at factory ride height. It is a front shock with a lift entry of 0 to 6 inches.
The collar is a patent-pending 180 degree SS design. In a coilover strut layout the shock and spring share one assembly, so the collar setting changes front ride height while the factory spring stays in place. The zinc plated, clear coated body is nitrogen charged and is designed to give an off-road style ride.
Key features
- Height adjustable collar, up to 2.75 in.
- Clearance for 35 in. tires at the raised setting
- Factory coil spring retained
- Nitrogen charged with a zinc plated, clear coated finish
Collar height and spring choice
A collar changes front ride height by moving the spring seat along the strut, so the setting affects how the suspension sits at rest and how far it can travel. Raising the front can change steering geometry, and the tires may rub the fender or inner liner at full lock if the clearance is marginal. Setting the collar with the vehicle at its normal load gives a more accurate result than setting it on an empty truck.
Because the factory spring stays in place, its condition matters. A sagging or cracked spring will reduce how much height the collar can add and can make the front feel unsettled. Check the spring, the upper mount and the bump stop while the strut is apart, and note the collar position so it can be returned to the same setting after service.
- Set the collar with the truck at normal load
- Check tire clearance at full steering lock
- Inspect the spring and upper mount for wear
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | ZX2014 |
| UPC | 614901024135 |
| Shock series | Pro Runner SS |
| Position | Front |
| Lift height | 0 to 6 in. |
| Ride height adjustment | Up to 2.75 in., or factory height |
| Tire clearance | 35 in. |
| Coil spring | Factory spring retained; new spring not included |
| Charge | Nitrogen |
| Finish | Zinc plated, clear coated |
Vehicle fitment
It is designed for late-model trucks and SUVs with independent coilover strut front suspension. Verify the year, model and trim of your vehicle before ordering.
Installation notes
Keep the factory coil spring when fitting, because none is included, and confirm that the 0 to 6 inch lift range suits your truck.
What’s included
One Pro Runner SS shock with its height adjustable collar. The coil spring is not included.





































