Select your vehicle
-13%

Pro Comp ES3000 Series Shock Absorber – 322553

Pro Comp Suspension

Shop Dodge Ram 1500 Shock Absorbers on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rear shock for 1994–2002 Dodge Ram 1500, 2500 and 3500 and 2005–2007 Ford F-250 Super Duty
  • Part 322553, ES3000 Series, rated for 0 in. lift or drop
  • Factory upper and lower mounts, lengths vehicle specific
  • Hydraulic, non-adjustable, sold as each

Description

Overview

The Pro Comp Suspension ES3000 322553 is a rear hydraulic shock absorber for Dodge Ram pickups, Ford and Toyota trucks. It fits the 1994–2001 Dodge Ram 1500, the 1994–2002 Dodge Ram 2500 and Ram 3500, the 2005–2007 Ford F-250 Super Duty, and the 2007–2014 Toyota FJ Cruiser. The shock uses factory upper and lower mounts, and its lengths are vehicle specific.

Pro Comp rates the 322553 for 0 in. of lift or drop. Pro Comp’s twin tube cellular gas body carries 10-stage velocity-sensitive valving, plus a 5/8 inch chrome-hardened piston rod and a Teflon rebound stop. The double welded mounts add strength, and the shock is covered by the Pro Comp Suspension limited lifetime warranty.

Key features

  • Twin tube cellular gas design
  • 10-stage velocity-sensitive valving
  • 5/8 inch chrome-hardened piston rod
  • Teflon rebound stop
  • Double welded shock mounts
  • Factory upper and lower mounts
  • Rear position, rated for 0 in. lift or drop
  • Pro Comp Suspension limited lifetime warranty

Choosing rear shocks

Rear shocks carry much of the load when the bed is loaded or a trailer is hitched, so damping and mount strength matter more here than on lightly used trucks. A worn rear shock often shows as a bouncy ride, a rear end that sways in crosswinds, or a hop after bumps. Inspect the mounts for cracks and the rubber bushings for tearing.

Rear shocks on the same axle should be matched, since different damping rates can make the rear feel unsettled. Replacing both sides at once keeps the handling balanced. Before installing, make sure the new unit reaches the same ride height as the old one, because a shock that is too long or too short can strain the mounts and limit suspension travel.

  • Leaks or an oil film on the body
  • Hopping or rear sway over bumps
  • Worn or split mount bushings

Specifications

Brand Pro Comp Suspension
Part number 322553
UPC 614901041859
Shock series ES3000
Position Rear
Type Hydraulic, twin tube cellular gas design
Extended, collapsed and travel lengths Vehicle specific
Upper mount Factory
Lower mount Factory
Lift height rating 0 in. lift or drop
Adjustable No
Remote reservoir No
Finish White
Boot included No
Sold as Each

Vehicle fitment

It fits the 1994–2001 Dodge Ram 1500 (Base, LT, Laramie, ST and Sport), the 1994–2002 Dodge Ram 2500 (Base), the 1994–2002 Dodge Ram 3500 (Base), the 2005–2007 Ford F-250 Super Duty (Harley-Davidson Edition, King Ranch, Lariat, XL and XLT) and the 2007–2014 Toyota FJ Cruiser (Base, TRD Special Edition and Trail Teams Special Edition).

Dodge Ram 1500 models from 2002 and later, Dodge Ram 2500 and 3500 models from 2003 and later, and Ford Super Duty trucks outside 2005 to 2007 are not on this list. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

The rear shock is rated for 0 in. lift or drop, so confirm the ride height on your truck or FJ Cruiser before fitting. Compare the vehicle-specific lengths with the shock being replaced.

What’s included

One shock absorber, part 322553.

Not included: the dust boot.

SKU: EXP322553 Category:

Specification

Shipping weight 5.88 lbs
Package dimensions 25.00 × 3.00 × 3.00 in
brands

Fitment

VehicleYearsTrims
Dodge Ram 15001994–2001Base, LT, Laramie, ST, Sport
Dodge Ram 25001994–2002Base
Dodge Ram 35001994–2002Base
Ford F-250 Super Duty2005–2007Harley-Davidson Edition, King Ranch, Lariat, XL, XLT
Toyota FJ Cruiser2007–2014Base, TRD Special Edition, Trail Teams Special Edition

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the Pro Comp ES3000 322553 fit a 2008 Toyota FJ Cruiser?

Yes. The 2008 model year is inside the 2007–2014 FJ Cruiser range Pro Comp lists, which covers the Base, TRD Special Edition and Trail Teams Special Edition versions. Confirm your vehicle's year, model and trim before ordering.

Does the 322553 fit a Dodge Ram 2500?

Yes, for the 1994–2002 model years, in the Base version. Ram 2500 models from 2003 and later are not on the list.

Is the 322553 a rear shock?

Yes. It is fitted in the rear position. It is non-adjustable, finished in white, rated for 0 in. of lift or drop, and the dust boot is not included.

Should rear shocks be replaced in pairs?

Usually yes. Shocks on the same axle wear at similar rates, and mismatched damping can make the rear feel unsettled over bumps. Replacing both sides keeps the ride balanced. Check the opposite side for leaks or worn bushings before ordering.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Dodge Ram 1500 Shock Absorbers on Amazon