Overview
The Pro Comp Suspension ES3000 324507 is a rear hydraulic shock absorber for the 1999–2003 Dodge Durango Base, SLT, SLT Plus, SXT and Sport models. It is sold individually and has loop mounts at both ends.
It measures 24.84 in extended and 14.82 in collapsed, with 10.02 in of travel. Pro Comp rates it for 0 to 1 in. of lift. The ES3000 is a twin tube cellular gas design with 10-stage velocity-sensitive valving and a 5/8 inch chrome-hardened piston rod. The Teflon rebound stop and double welded mounts are part of the same build, and the shock carries the Pro Comp Suspension limited lifetime warranty.
Key features
- Twin tube cellular gas design
- 10-stage velocity-sensitive valving
- 5/8 inch chrome-hardened piston rod
- Teflon rebound stop
- Double welded shock mounts
- Loop upper and lower mounts
- Rear position, rated for 0 to 1 in. of lift
- Sold individually
Single shocks and matching
Buying a single shock makes sense when only one side has failed, but the other side often has similar mileage and wear. Damping that differs from side to side can make the rear end feel unsettled through corners and on uneven pavement. Before ordering one unit, check the other rear shock for leaks, dents and loose mounts.
SUVs like the Durango carry more weight at the rear when loaded, which means the shocks work hard over time. Loop mounts at both ends are simple to inspect: look for cracked bushings, worn pins and corrosion around the eyes. Keeping the bushings in good shape helps the shock move freely and reduces noise over rough roads.
- Check the opposite rear shock for leaks and dents
- Inspect loop bushings for cracks and wear
- Wipe the piston rod clean before installing
- Confirm the shock is oriented as the old unit was
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 324507 |
| UPC | 614901695762 |
| Shock series | ES3000 |
| Position | Rear |
| Type | Hydraulic, twin tube cellular gas design |
| Extended length | 24.84 in |
| Collapsed length | 14.82 in |
| Travel length | 10.02 in |
| Upper mount | Loop |
| Lower mount | Loop |
| Lift height rating | 0 to 1 in. of lift |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Single shock, sold individually |
Vehicle fitment
It fits the 1999–2003 Dodge Durango in the Base, SLT, SLT Plus, SXT and Sport versions.
Dodge Durango models from 1998 and from 2004 onward are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The 0 to 1 in. lift rating suits a Durango at or near factory height. Compare the 24.84 in extended and 14.82 in collapsed lengths with the rear shock you are replacing before fitting.
What’s included
One shock absorber, part 324507, sold individually.
Not included: the dust boot.











