Select your vehicle
-13%

Pro Comp ES9000 Series Shock Absorber – 929573

Pro Comp Suspension

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Pro Comp ES9000 shock 929573, extended 28.93 inches
  • Twin tube, nitrogen gas charged, 10-stage valving
  • Factory mounts, white finish
  • Sold as each

Description

Overview

The 929573 is a nitrogen gas charged ES9000 shock with a twin tube body and 10-stage velocity sensitive valving. Its valving keeps highway ride smooth while adding control off road.

It measures 28.93 inches extended, 17.32 inches collapsed and 12.51 inches of travel. The shock uses factory upper and lower mounts and is sold as each.

Key features

  • Twin tube body
  • 10-stage velocity sensitive valving
  • Full displacement piston head with a nylon band
  • Double welded shock mounts
  • White finish

Balancing ride and control

Damping decides how quickly a shock resists movement. A shock that is too firm can make the highway ride harsh, while one that is too soft can float over whoops and bumps. Valving with many stages helps the shock respond differently to slow and fast movement. For a truck that spends time on pavement and gravel, that balance matters more than maximum stiffness.

Because the factory mounts are kept, installation follows the original layout, which makes it easier to swap a worn shock without changing the geometry. Before installing, clean the mounting surfaces and check the bushings. After a few drives, inspect the shock body and mounts for oil, cracks or loose bolts, and retighten as needed.

  • Replace shocks in matched sets on an axle
  • Clean mounting surfaces before installation
  • Check bushings and bump stops during service

Specifications

Brand Pro Comp Suspension
Part number 929573
UPC 614901072303
Series ES9000
Extended length 28.93 inches
Collapsed length 17.32 inches
Travel 12.51 inches
Mounts Factory upper and lower
Adjustable No

The 929573 is the shortest extended length in the ES9000 group shown here, at 28.93 inches, with a 17.32 inch collapsed length and 12.51 inches of travel. A shorter extended length is a fit point to check against the original shock, because a longer or shorter replacement can change the ride height and the suspension geometry. The factory mounts keep the installation close to the original setup.

The 10-stage valving and nitrogen gas charge balance highway comfort with off road control.

Vehicle fitment

Check the length and mounting points against your truck before ordering.

Confirm your vehicle’s year, model and trim before ordering.

What’s included

One shock, with no boot included.

SKU: EXP929573 Category:

Specification

Shipping weight 7.00 lbs
Package dimensions 25.00 × 3.00 × 3.00 in
brands

Questions & Answers

What is the extended length of the Pro Comp 929573?

The shock measures 28.93 inches extended and 17.32 inches collapsed, with 12.51 inches of travel. Check those lengths against the shock you are replacing before ordering, because the stroke has to suit the truck.

Does the 929573 have adjustable damping?

No. It is a non-adjustable shock with 10-stage velocity sensitive valving. The damping is set by the valving inside the shock rather than by an external adjuster.

Is the 929573 a remote reservoir shock?

No. It has no remote reservoir and is finished in white. It uses factory mounts at both ends, so the original hardware is reused.

How do I tell if the valving is wearing out?

A worn shock often feels bouncy after a bump, takes longer to settle, or lets the truck wallow in turns. Oil on the outer tube is another sign. A worn sealed twin tube is usually replaced rather than rebuilt.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon