Overview
The Pro Comp Pro Runner ZX2040 is a rear nitrogen-charged monotube shock absorber with a 2 inch diameter body. It is designed for a 0 to 4 inch lift and fits the 2007 to 2015 and 2018 Jeep Wrangler JK, including Unlimited models.
The shock is tuned for each application with vehicle-specific ride tuning and multi-stage valving developed through dyno and real-world testing. The brushed, zinc plated, clear coated body is nitrogen gas charged. A rubber bushing and black polyurethane shock boots come with it.
Check the space around the existing rear shock against the 2 inch body before fitting. The shock is sold as a single rear unit with its bushing and boots.
Key features
- Rear placement for a 0 to 4 inch lift
- 2 inch diameter body
- Nitrogen gas charge with a brushed zinc and clear coat finish
- Rubber bushing included
- Black polyurethane shock boots included
Boots and bushings
Shock boots keep grit off the shaft and seal, and a split boot lets dirt work into the area where the shaft slides. Replacing only the boot is rarely practical on a monotube unit, so a damaged boot is usually a reason to inspect the whole shock. On a Wrangler JK the boots sit in the open where rocks and mud strike, so look them over after each trail outing.
The rubber bushing at the eye takes movement from the mount. Worn or cracked bushings add play and noise and can change how the shock is loaded. Check the bushing on the bench before fitting, and inspect the mounting hardware for wear at the same time.
- Inspect boots after off-road trips
- Check bushings for cracks or play
- Clear grit from the shaft before fitting
- Replace hardware that shows wear
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | ZX2040 |
| UPC | 614901024432 |
| Shock series | Pro Runner |
| Position | Rear |
| Lift height | 0 to 4 in. |
| Body diameter | 2 in. |
| Gas charged | Yes, nitrogen |
| Finish | Brushed zinc, clear coat |
| Included hardware | Rubber bushing; black polyurethane shock boots |
Vehicle fitment
It fits the 2007 to 2015 Jeep Wrangler JK, including the 70th Anniversary, Rubicon, Sahara, Sport and X models and their Unlimited versions, and the 2018 Wrangler JK.
Wrangler JK years outside 2007–2015 and 2018, and the JL, TJ, LJ and YJ generations, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm the lift range against your Wrangler, and check the space around the existing shock because the 2 inch body is listed apart from the lengths.
What’s included
One rear monotube shock, with a rubber bushing and black polyurethane shock boots.



























