Overview
The Pro Comp Suspension ES3000 325515 is a hydraulic shock absorber from the ES3000 Series that uses factory upper and lower mounts. Its extended, collapsed and travel lengths are vehicle specific. The shock is finished in white and is not adjustable. Pro Comp names no position or vehicle for this part, so the lengths and mounts should be checked against the shock being replaced before ordering. Its lengths are vehicle specific.
The ES3000 uses a twin tube cellular gas design with 10-stage velocity-sensitive valving. A 5/8 inch chrome-hardened piston rod and Teflon rebound stop are fitted, and the shock carries the Pro Comp Suspension limited lifetime warranty.
Key features
- Twin tube cellular gas design
- 10-stage velocity-sensitive valving
- 5/8 inch chrome-hardened piston rod
- Teflon rebound stop
- Double welded shock mounts
- Factory upper and lower mounts
- White finish
- Pro Comp Suspension limited lifetime warranty
Signs the old shock is worn
Worn shocks often show up as a ride that feels loose or floaty, especially on washboard roads or after the truck has been loaded. The tires may cup or scallop as the damper stops controlling the wheel’s movement. A leak of oil down the body is a clear sign the seals have failed, and a dented or bent body can affect the piston’s travel inside the cylinder.
A quick check starts with the bounce test: press down hard on a corner and release, then count how many times the body rises and settles. Also look at the rubber bushings and the mounting hardware, since a worn bushing can make a good shock feel bad. Replacing the damper alone may not fix a noise that comes from a worn mount.
- Oil residue on the outside of the body
- Cupped or scalloped tire wear
- Excess body motion after a bump
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 325515 |
| UPC | 614901695809 |
| Shock series | ES3000 |
| Type | Hydraulic, twin tube cellular gas design |
| Extended, collapsed and travel lengths | Vehicle specific |
| Upper mount | Factory |
| Lower mount | Factory |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
Fit must be checked for your vehicle before ordering. Compare the factory mounts and vehicle-specific lengths with your current shock.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One shock absorber, part 325515.
Not included: the dust boot.






