Overview
The Pro Comp Suspension ZXR250000 is a rear monotube shock with a remote reservoir for the 2007 to 2021 Toyota Tundra. It belongs to the Pro Runner series and is designed for a vehicle with 0 inches of lift or drop.
The shock uses a nitrogen gas charged 2.5-inch monotube body. The external reservoir adds fluid capacity and helps the shock release heat, which reduces fade.
Key features
- Monotube body with external reservoir
- Nitrogen gas charged
- Multi-stage valving
- Brushed, zinc plated and clear coated body
- Designed for vehicles with 0 inches of lift or drop
Rear ride height and travel
A rear shock controls how the axle and rear springs settle after bumps, and it carries much of the load the springs cannot absorb alone. Damping is matched to the ride height the truck was built with, so a change in height can alter how the shock works through its travel. Measuring the ride height before and after any change helps confirm the shock is working within its intended range.
Rear shocks wear out gradually, and the signs are usually subtle at first. Look for oil on the body, a bouncy rear end after dips, or cupping on the rear tires. The remote reservoir line should be checked for chafing where it passes the frame or spare tire mount, because a damaged line will quickly lose fluid and reduce damping.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | ZXR250000 |
| Shock series | Pro Runner |
| Position | Rear |
| Shock type | Monotube with reservoir |
| Lift height | 0 in lift or drop |
| Charge | Gas charged |
Vehicle fitment
It fits the 2007 to 2021 Toyota Tundra, including the Base, SR5, Limited, Platinum and TRD Pro models.
It does not fit other Toyota trucks or the front position. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Pro Comp rates this rear shock for 0 inches of lift or drop, so measure the ride height before ordering the unit, and confirm the spring and bump stop setup on your truck. The external reservoir needs a clear mounting spot and hose path, and the monotube body should sit plumb when installed.
The rear shock’s valving is set for a stock-height truck, so a truck with a lift or a leveling spacer should be checked for travel before the shock is used on the road. Confirm the upper and lower mounts seat fully and the remote reservoir line is clear of the spare tire carrier or any rear bumper fitted to the truck.
What’s included
One rear monotube shock with remote reservoir under part number ZXR250000.


















