Overview
The Pro Comp Suspension ES3000 321515 is a front hydraulic shock absorber for the 1999–2006 Chevrolet Silverado 1500, the 1999–2006 GMC Sierra 1500 and the 2001–2003 and 2005–2006 GMC Sierra 1500 HD. It also fits Jeep models, including the 1984–2001 Cherokee XJ, the 1999–2004 Grand Cherokee WJ, the 1993–1998 Grand Cherokee ZJ, the 1984–1990 Wagoneer SJ, the 1986–1992 Comanche, the 2004–2006 Wrangler LJ and the 1997–2006 Wrangler TJ.
The shock measures 21.75 in extended and 13.06 in collapsed, with 8.69 in of travel. It has a stem at the top and a loop at the bottom, and Pro Comp rates it for 0 to 2 in. of lift. The ES3000 is a twin tube cellular gas design with 10-stage velocity-sensitive valving and a Teflon rebound stop, and it carries the Pro Comp Suspension limited lifetime warranty.
Key features
- Twin tube cellular gas design
- 10-stage velocity-sensitive valving
- 5/8 inch chrome-hardened piston rod
- Teflon rebound stop
- Double welded shock mounts
- Stem upper mount and loop lower mount
- Rated for 0 to 2 in. of lift
- Pro Comp Suspension limited lifetime warranty
Lift and ride height
Shocks are matched to a range of ride heights, and a truck near stock height works within a different range than one with a lift. At or near stock height, the shock keeps the body controlled on pavement and over ordinary bumps. Trucks and Jeeps that have been raised need extra care in matching shock length to suspension travel.
Off-road driving puts more load on the shock during rebound and compression, so the condition of the piston rod and seals becomes important. Inspect the rod for pitting after trail use, and watch for oil residue around the seal. Replacing a shock together with its mounts keeps the setup balanced between the sides.
- Check the rod for scratches or pitting
- Look for oil residue at the seal
- Match left and right shocks on the same axle
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 321515 |
| UPC | 614901041415 |
| Shock series | ES3000 |
| Position | Front |
| Type | Hydraulic, twin tube cellular gas design |
| Extended length | 21.75 in |
| Collapsed length | 13.06 in |
| Travel length | 8.69 in |
| Upper mount | Stem |
| Lower mount | Loop |
| Lift height rating | 0 to 2 in. of lift |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Each |
Vehicle fitment
It fits the 1999–2006 Chevrolet Silverado 1500 (Base, Hybrid, LS, LT, SS and WT), the 1999–2006 GMC Sierra 1500 (Base, HT, Hybrid, SL, SLE, SLT and WT), the 2001–2003 and 2005–2006 GMC Sierra 1500 HD (SLE and SLT), the 1984–2001 Jeep Cherokee (XJ), the 1986–1992 Jeep Comanche, the 1999–2004 Jeep Grand Cherokee (WJ), the 1993–1998 Jeep Grand Cherokee (ZJ), the 1984–1990 Jeep Wagoneer (SJ), the 2004–2006 Jeep Wrangler (LJ) Unlimited and Unlimited Rubicon, and the 1997–2006 Jeep Wrangler (TJ).
The Silverado and Sierra 1500 from 2007 and later, the Jeep Grand Cherokee WK and newer Wrangler JK and JL models, and the Jeep Cherokee from 2002 and later are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The 0 to 2 in. lift rating means this shock suits trucks and Jeeps at or near stock height. Confirm the lift on your vehicle before ordering, and compare the 21.75 in extended and 13.06 in collapsed lengths with the shock you are removing.
What’s included
One shock absorber, part 321515.
Not included: the dust boot.










