Overview
The Pro Comp 314580 is an ES3000 Series shock absorber with a twin tube cellular gas design. The shock is built to improve driving comfort and performance on and off road, with 10 stage velocity sensitive valving that adapts to changing road conditions and supports vehicle handling.
The piston rod is a 5/8 inch chrome hardened part, and the rebound stop is Teflon, a combination Pro Comp describes as delivering a comfortable highway ride and the control needed for demanding driving. The shock mounts are double welded for maximum strength.
The shock is covered by Pro Comp’s limited lifetime warranty. It is a universal fit shock, so the length and mounting style of the vehicle must be checked before ordering.
Key features
- Twin tube cellular gas design
- 10 stage velocity sensitive valving
- 5/8 inch chrome hardened piston rod
- Teflon rebound stop
- Double welded shock mounts
Ordering a twin tube shock
A twin tube design uses an inner working cylinder and an outer reserve chamber, with gas in the reserve to keep damping consistent. Cellular gas designs of this type are common in replacement shocks, and they perform best when the mounts and bushings around them are sound.
Before ordering, compare the shock’s length and stroke with the factory unit. Mounts should match the bracket style, and the shock should sit square without binding at full compression or rebound. Universal fit parts need this check more than vehicle-specific ones.
Rebound and compression behavior change with wear. Oil on the body, a bouncing ride or uneven tire wear are signs the shock has done its job.
- Measure installed length before ordering
- Check the mount style at both ends
- Replace in pairs on the same axle
- Inspect bushings when fitting
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 314580 |
| UPC | 614901695472 |
| Shock series | ES3000 Series |
| Body | Twin tube, cellular gas |
| Valving | 10 stage, velocity sensitive |
| Piston rod | 5/8 in, chrome hardened |
| Rebound stop | Teflon |
| Mounts | Double welded |
| Warranty | Pro Comp limited lifetime |
| Fitment type | Universal fit |
Vehicle fitment
It is a universal fit shock. Confirm the extended and collapsed lengths and mount style your vehicle needs before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One ES3000 Series shock absorber, sold as a single unit.












