Overview
The Pro Comp ZX4078 is a front coilover from the Black Series 2.75 line. It is a nitrogen gas charged monotube design with a lift range of 0 to 2.5 inches, and it is sold individually.
The coilover is built to match Pro Comp’s Pro Runner control arms. Each unit is hand assembled and valved for its application, and the upper and lower mounts use heavy-duty spherical bearings.
Key features
- Nitrogen gas charged monotube
- Adjustable front coilover
- Clear coated zinc finish
- Oversized 2.75-inch body with increased oil capacity
- Heavy-duty spherical bearings at both mounts
Choosing a coilover setup
A coilover combines the spring and the damper in one unit, so replacing it changes how the front end rises, compresses and rebounds. When choosing one, think about how far the truck is raised and how it will be driven. A coilover built for moderate front height suits daily driving with some trail use, while a truck that carries heavy gear may benefit from the extra oil capacity of a larger body.
Coilovers are often replaced alongside matching control arms or other front suspension parts when the setup changes, because the geometry shifts. After installing, check the spring seats, mounts and bolts after the first few drives, and look for leaks around the body and shaft. Replacing both fronts together keeps the truck level and the damping even from side to side.
- Check mounts and bolts after the first few drives
- Look for oil seepage around the body and shaft
- Keep left and right units matched
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | ZX4078 |
| UPC | 614901141375 |
| Series | Black Series 2.75 |
| Position | Front |
| Lift range | 0 to 2.5 inches |
| Finish | Clear coated zinc |
| Sold as | Each |
The Black Series 2.75 is a coilover with a larger 2.75-inch body, which holds more oil so the coilover can run cooler under long, rough driving. The ZX4078 is rated for a front lift range of 0 to 2.5 inches, so it suits trucks that need extra front height rather than a large lift. Heavy-duty spherical bearings at both mounts reduce deflection, and each unit is tuned for the application it is sold for.
Because a coilover changes both the spring and the damping, the alignment should be set after installation.
Vehicle fitment
It belongs to the Black Series 2.75 family. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A front coilover that raises the truck changes the alignment, so have the alignment set after installation.
What’s included
One Black Series 2.75 front coilover.















