Overview
The Pro Comp 315511 is a front ES3000 twin tube cellular gas shock. It is 15.69 inches extended and 10.02 inches collapsed, with 5.67 inches of travel.
The shock uses a stem upper mount and a loop lower mount. It is white, not adjustable and sold as each.
Key features
- Twin tube cellular gas design
- 10-stage velocity sensitive valving
- Teflon rebound stop
- Stem upper and loop lower mounts
- Limited lifetime warranty
Measuring before you buy
Before buying a shock, take measurements from the old unit with the truck at its normal ride height. The extended length, collapsed length and stroke tell you how much the shock can extend and compress. Mount type matters just as much, since a stem and loop combination will only fit a bracket that suits both ends.
Look at the old shock’s mounts closely, because wear can change the measurement. Replace the shock with one of the same length and mount type. Keep the bushings and bolts in good condition, and check that the shock does not contact the frame or the spring at full extension once installed.
- Measure at normal ride height
- Compare stroke, not just overall length
- Confirm mount type at both ends
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 315511 |
| Series | ES3000 |
| Extended length | 15.69 inches |
| Collapsed length | 10.02 inches |
| Travel | 5.67 inches |
| Upper mount | Stem |
| Lower mount | Loop |
The 315511 uses a stem upper mount and a loop lower mount, so its top and bottom connections are different from each other. Its 15.69 inch extended length and 10.02 inch collapsed length give 5.67 inches of travel. The shock is built with a twin tube cellular gas design, 10-stage velocity sensitive valving and a Teflon rebound stop, and its 5/8 inch chrome hardened piston rod is part of the same line.
Compare the stem and loop mounts and the 15.69 inch extended length with your original shock before ordering, since the truck it suits is open to confirmation.
The twin tube body holds the oil and gas separately, which is the design Pro Comp uses across the ES3000 family.
Vehicle fitment
Confirm the stem and loop mounts and the 15.69 inch extended length against your original shock before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One ES3000 shock.











