Overview
The Pro Comp ES9000 Series Shock Absorber (part number 925518) is a rear twin tube shock for the 2005–2015 Toyota Tacoma with a 3 in. lift. It is a direct fit and gas charged.
The shock uses 10 stage velocity sensitive valving, which Pro Comp says delivers a smooth, comfortable ride while improving off-road handling. A 1 3/8 inch nylon banded, full displacement piston head and double welded shock mounts are included. Pro Comp gives the shock a 25.75 in. extended length and a 15.04 in. collapsed length, with 10.71 in. of travel.
Key features
- 10 stage velocity sensitive valving
- 1 3/8 in. nylon banded, full displacement piston head
- Double welded shock mounts
- Stem upper mount and loop lower mount
- Gas charged design
- Non-adjustable, with no remote reservoir
Rear shock setup on a Tacoma
A Tacoma rear shock works with the leaf spring or coil arrangement and the axle position, so its mounts have to clear the frame and axle brackets through the full range of motion. Stem and loop mounts are different types, and the bracket on the truck has to accept the stem end. Check bracket clearance before the old shock comes off, because brackets can differ between trucks.
Rear shocks on a truck that carries cargo or tows often wear sooner than fronts, so inspect them at the same time as the leaf springs and bushings. Look for oil on the body, a knocking feel over bumps, or uneven rear tire wear. Replace shocks in matching sets so both sides damp the same way.
- Support the axle safely before removing the old shock
- Check the stem end fits the truck bracket
- Inspect rubber bushings on the lower loop mount
- Recheck all fasteners after the first few drives
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 925518 |
| UPC | 614901696455 |
| Shock series | ES9000 |
| Position | Rear |
| Lift height | Fits a 3 in. lift |
| Extended length | 25.75 in. |
| Collapsed length | 15.04 in. |
| Travel | 10.71 in. |
| Upper mount | Stem |
| Lower mount | Loop |
| Adjustable | No |
| Remote reservoir | No |
| Gas charge | Gas charged |
| Piston head | 1 3/8 in., nylon banded, full displacement |
| Valving | 10 stage, velocity sensitive |
| Shock finish | White |
| Boot included | No |
Vehicle fitment
The shock fits the 2005–2015 Toyota Tacoma, including the Base and Pre Runner versions.
The list does not include the 2016 and later Tacoma or other Toyota models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the 25.75 in. extended and 15.04 in. collapsed lengths against the mounts on your truck before installing. The upper mount is a stem, so confirm the bracket on your truck accepts it.
Support the rear axle before removing the old shock.
What’s included
No boot is included. Other parts are not bundled with this shock.











