Overview
The Pro Comp Suspension ES3000 321500 is one hydraulic shock absorber from the ES3000 Series, sold individually. It has loop mounts at both ends and measures 22.58 in extended and 13.71 in collapsed, with 8.87 in of travel. The shock is finished in white and is non-adjustable.
The shock is a twin tube design with cellular gas and 10-stage velocity-sensitive valving. Its 5/8 inch chrome-hardened piston rod and Teflon rebound stop support a comfortable highway ride and harder use. Double welded shock mounts and the Pro Comp Suspension limited lifetime warranty complete the build.
Key features
- Twin tube cellular gas design
- 10-stage velocity-sensitive valving
- 5/8 inch chrome-hardened piston rod
- Teflon rebound stop
- Double welded shock mounts
- Loop upper and lower mounts
- Sold individually
- Pro Comp Suspension limited lifetime warranty
Single shock or pair
Because this shock is sold individually, each position needs its own unit. Shocks on the same axle should be matched so both sides control the spring the same way. A single worn unit can pull the truck to one side under braking or make the ride feel uneven.
Loop mounts usually bolt directly to brackets on the vehicle. Check that the bracket holes are clean and undamaged before fitting. Mount bushings and bolts can wear over time and are worth inspecting when the shock comes off.
Good preparation saves time. Keep the old shock as a reference for length, and lay the new unit beside it to compare. Clean the mounting points before fitting, and torque the bolts to the vehicle’s requirements.
- Replace shocks in pairs on an axle
- Keep the old unit for length comparison
- Clean the mounting points before fitting
- Inspect loop bushings for wear
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 321500 |
| UPC | 614901041231 |
| Shock series | ES3000 |
| Type | Hydraulic, twin tube cellular gas design |
| Extended length | 22.58 in |
| Collapsed length | 13.71 in |
| Travel length | 8.87 in |
| Upper mount | Loop |
| Lower mount | Loop |
| Adjustable | No |
| Remote reservoir | No |
| Finish | White |
| Boot included | No |
| Sold as | Single shock, sold individually |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim before ordering. Match the 22.58 in extended length, 13.71 in collapsed length and loop mounts against the shock on your vehicle.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
One shock absorber, part 321500, sold individually.
Not included: the dust boot.





















