Overview
The Pro Comp Black Series 2.75 Coilover Shock Absorber (part number ZX4080) is a front coilover in the Pro Runner 2.75 line. It is a nitrogen gas charged monotube unit that raises the front suspension by up to 2.5 inches.
The Pro Runner 2.75C coilovers are made to pair with the Pro Runner control arms. Each unit is hand assembled and valved for its intended application, with a smooth ride on and off road.
Key features
- Adjustable monotube design
- Nitrogen gas charged
- Oversized 2.75 inch zinc plated body, which Pro Comp says increases oil capacity for cooler operation
- Heavy-duty teflon steel alloy spherical bearings at the upper and lower mounts
- Clear coated zinc finish
- Lift height 0 to 2.5 inches
Setting ride height and damping
Coilovers combine the spring and shock into one unit, so ride height and damping are set together. Adjustable monotube shocks let the ride be tuned, but the setting should be chosen with the vehicle loaded the way it normally drives. Once the height is set, the upper and lower mounts should be checked for play after the first few drives.
Lowering or raising the front changes steering geometry, so an alignment should follow any height change. Nitrogen gas charged shocks are a common choice for trail and highway use because the damping holds up well under repeated hard use. Check the shock body for seepage, and keep the dust boots clean so the shaft is not scored.
- Align the front end after height changes
- Check mounts for play after first drives
- Inspect shock bodies for seepage
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | ZX4080 |
| UPC | 614901220100 |
| Position | Front |
| Type | Coilover, monotube |
| Gas charge | Nitrogen |
| Lift height | 0 to 2.5 in |
| Body | 2.75 in zinc plated |
| Finish | Clear coated zinc |
| Quantity | 1 |
Vehicle fitment
It is sold as a direct fit for the 2.75 Black Series line, so confirm your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Coilover changes raise the front end, so check the alignment and the front driveline angles after installation. Pro Comp says each unit is valved for its application.
What’s included
The package is one coilover; control arms are not part of this item.








