Overview
The Pro Comp Pro Runner monotube shock absorber, part number ZX2113, is a rear shock for the 2014 Ram 2500 and 2014 Ram 3500. It is nitrogen gas charged, has a 2 inch diameter body and is rated for a 2 inch lift.
The Pro Runner monotube is designed to pair with Pro Runner control arms. The body is brushed and zinc plated with a clear coat, and the ride tuning is vehicle specific, using multi-stage valving. The nitrogen charge helps the shock dissipate heat and resist cavitation during compression and rebound, and it suits towing and rough desert driving.
The shock comes with a rubber bushing and black polyurethane boots. The warranty includes a 90-day ride guarantee and a true lifetime warranty that is 100% transferable, so it stays with the shock if the truck changes owners.
Key features
- Nitrogen gas charged monotube design
- Multi-stage valving tuned to the application
- Brushed zinc plated body with a clear coat
- Rubber bushing and black polyurethane boots included
- Designed to pair with Pro Runner control arms
Towing and rear suspension
A rear shock does more work than most drivers expect. Under load, on washboard roads or after a long climb, it controls how quickly the axle rebounds and how much heat builds in the damping. A nitrogen charged monotube is built to hold its damping under those conditions, which is why it is a common choice for trucks that tow or run rough terrain.
Rear shocks wear with the rest of the suspension, so they are best inspected alongside the control arms, bushings and springs. Worn parts can change how the shock works and shorten its life. Keep the lift in mind, because a shock matched to the wrong rating can limit travel or wear faster.
- Check that the rear lift matches the shock rating
- Inspect boots for splits after off-road runs
- Replace worn control arm bushings during service
- Look for leaks, fade or a bouncing rear end
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | ZX2113 |
| UPC | 614901143737 |
| Series | Pro Runner |
| Position | Rear |
| Type | Monotube, nitrogen gas charged |
| Body diameter | 2 in |
| Lift rating | 2 in lift |
| Finish | Brushed zinc and clear coat |
| Included | Rubber bushing and black polyurethane boots |
| Warranty | 90-day ride guarantee; true lifetime warranty, 100% transferable |
| Fitment | Direct fit |
Vehicle fitment
It fits the 2014 Ram 2500 and the 2014 Ram 3500, across several trim levels in each model.
The list includes only 2014 Ram 2500 and 3500 models, so Ram 1500 models and other years are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The shock is rated for a 2 inch lift, so match the rating to the rear lift on your truck before installing it. Because the shock is tuned to its application, the rating should match the lift on the truck it goes into.
What’s included
One rear shock with a rubber bushing and black polyurethane boots.


























