Overview
The Pro Comp PXA1069-7970 is a 17×9 polished aluminum wheel from the Pro Comp 69 Series Vintage line, with a Holes style face and an 8 on 170 bolt pattern. It is sold as one wheel with a center bore of 72 and an offset of -6.
Pro Comp says its Vintage wheels are low-pressure cast and finished in black, chrome or polished for a look that pairs style with light weight. This polished version has a backspacing of 4.75 and carries the brand’s high offset design for brake clearance.
Key features
- Low-pressure cast aluminum
- Holes style face
- 17-inch diameter, 9-inch width
- 8 on 170 bolt pattern
- Center bore of 72
- Offset -6 with 4.75 backspacing
Center bore and hub pilot
The center bore is the hole at the middle of the wheel that fits over the hub pilot. A bore that is too large can leave the wheel riding on the lug studs, which causes vibration, while a bore that is too small will not seat at all. Measure the hub pilot diameter before ordering a wheel with a smaller bore.
Hub-centric rings can close the gap when a wheel’s bore is larger than the hub, but they should be sized to the exact difference. Choose rings that fit snugly without forcing, and check that the lug nuts still seat flat on the wheel after installation.
Clean the hub face and pilot before each mount, and recheck lug torque after the first few drives.
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA1069-7970 |
| Series | 69 Series Vintage (Classic) |
| Style | Holes |
| Construction | Aluminum |
| Finish | Polished |
| Diameter | 17 inches |
| Width | 9 inches |
| Bolt pattern | 8 on 170 |
| Center bore | 72 |
| Offset | -6 |
| Backspacing | 4.75 |
Vehicle fitment
The 8 on 170 pattern and 72 center bore are the first checks, and the -6 offset needs a clearance check at the caliper. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Use an eight-lug hub at 170 with a 72 center bore. Because the bore is smaller than the 125 or 131 bores on other Vintage wheels, confirm it matches the hub pilot before ordering.
What’s included
One 17×9 polished aluminum wheel. Compare the lug nut and center cap needs with your hub before installing.











