Overview
The Pro Comp 43 Series Sledge 20×9 wheel, part number PXA5143-2973, is a 20-inch aluminum spoke wheel that is 9 inches wide. It has a 5 on 5 bolt pattern and a satin black finish with milled accents, shown in the series name as 43 Series Sledge satin black and milled.
The wheel uses a 110 center bore, a 0 offset and a backspacing of 5. It is built for trucks and sport utility vehicles, and it is low-pressure cast. It is universal fit, so the hub bore and clearance decide whether it suits a vehicle.
Key features
- Low-pressure cast aluminum
- 20-inch diameter and 9-inch width
- 5 on 5 bolt pattern
- Center bore 110
- Offset 0 and backspacing 5
- Satin black with milled finish
Matching a 5 on 5 hub
A 5 on 5 pattern is a common five-lug layout, but matching the bolt pattern is only the first step. The 110 center bore should sit snugly on the hub. If the hub bore is larger, hub-centric rings can close the gap so the wheel centers on the hub rather than on the lug studs.
Lug nut length matters on spoke wheels, because a nut that bottoms out in the seat can leave the wheel loose. Confirm the nut thread engagement before driving, and check that the tire balances cleanly once it is mounted.
- Hub bore compared with the 110 center bore
- Rings to close a gap in the hub bore
- Lug nut length for the seat depth
- Balance after mounting a new tire
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA5143-2973 |
| Wheel diameter | 20 inches |
| Wheel width | 9 inches |
| Bolt pattern | 5 on 5 |
| Center bore | 110 |
| Offset | 0 |
| Backspacing | 5 |
| Load rating | 2500 to 3650 lbs per wheel. |
| Style | Spoke |
| Finish | Satin black, milled |
| Construction | Aluminum |
| Series | 43 Series Sledge |
Vehicle fitment
This wheel is not assigned to a make, model or year. Check the 5 on 5 pattern and 110 center bore against the hub, then confirm the 20-inch diameter clears the brake calipers.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure the caliper and tire before mounting a 20-inch wheel, and confirm that the wheel’s 0 offset leaves the expected gap to the fender.
The 110 center bore must seat on the hub, and the 5 on 5 pattern is the common five-lug layout to confirm. The 0 offset and 5 backspacing keep the mounting face centered, so caliper clearance is the remaining check.
The satin black finish with milled detail suits this spoke design.
What’s included
Check the package contents against your installation before starting, including lug nuts and center caps.











