Overview
The Pro Comp PXA5173-21082 is a 20×10 aluminum spoke wheel from the Pro Comp 73 Series Trilogy line, in satin black milled with an 8 on 6.5 bolt pattern. It is sold as one wheel with a center bore of 125 and an offset of -18.
This wheel is 10 inches wide with a backspacing of 4.75, and the brand’s high offset design is meant to provide brake clearance on trucks and sport utility vehicles.
Key features
- Low-pressure cast aluminum construction
- Spoke face style
- 20-inch diameter, 10-inch width
- 8 on 6.5 bolt pattern
- Center bore of 125
- Offset -18 with 4.75 backspacing
Clearance on a 20-inch rim
An eight-lug hub on 6.5 spacing and a 125 center bore are the mounting basics, but the wheel also has to clear the brake caliper and inner suspension parts. Wider rims with negative offset push the tire outward, which reduces inner room near the hub. Test-fit with the tire mounted and check the caliper at full steering lock.
Larger wheels add weight, so suspension and bearing wear show up faster on rough roads. Inspect ball joints, tie rods and wheel bearings when mounting new wheels, and look for worn steering components that cause the wheel to rub. Keep an eye on the tire sidewall for cuts and bulges, since low-profile tires on large rims are more prone to damage from road hazards.
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA5173-21082 |
| Series | 73 Series Trilogy |
| Style | Spoke |
| Construction | Aluminum |
| Finish | Satin black milled |
| Diameter | 20 inches |
| Width | 10 inches |
| Bolt pattern | 8 on 6.5 |
| Center bore | 125 |
| Offset | -18 |
| Backspacing | 4.75 |
Vehicle fitment
This wheel is offered for general use. Start with the 8 on 6.5 hub and 125 center bore, then check the -18 offset against the caliper and suspension.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure the hub for an 8 on 6.5 layout before ordering. A test fit with the tire and caliper in place shows whether the 10-inch rim clears the suspension at full steering lock. Eight lug holes on a 6.5 spacing have to match the hub, and the 125 center bore has to seat on the hub pilot. A 10-inch rim needs a tire sized to that width and to the 20-inch diameter, and the tire’s sidewall affects overall height. The -18 offset moves the tire outward, so check inner clearance with the tire mounted. Confirm the 4.75 backspacing against the room behind the mounting face, and recheck after any change in tire or suspension. Measure lug spacing across the holes before ordering. Steering components should clear the spokes at full lock.
What’s included
One 20×10 aluminum wheel in satin black milled. Match lug nuts and a center cap to the eight-lug hub before installing the wheel.











