Overview
The Pro Comp PXA7031-8973 is an 18×9 split-spoke aluminum wheel in the 31 Series Stryker line, finished in matte black. It sits on a 5 on 5 bolt pattern with a center bore of 83, a 0 offset and a backspacing of 5.
This 18-inch Stryker has the 5 on 5 pattern and a smaller 83 center bore than the 5 on 150 and 6 on 5.5 versions, so the hub must be checked carefully. The wheel is low-pressure cast aluminum.
The 5 on 5 pattern and 83 center bore need to match the hub. The 0 offset and 5 backspacing place this 18-inch face near the centerline, so the inner clearance should be checked on the truck.
The face is matte black split spoke, and the body is aluminum.
Choose a tire size that suits an 18-inch rim that is 9 inches wide before mounting.
This 18×9 wheel uses a 5 on 5 bolt pattern and an 83 center bore, so the hub has to match both numbers before installation. The 0 offset and 5 backspacing place the face near the centerline, and the inner clearance should be checked against the suspension. Choose a tire rated for the wheel’s diameter and width, and check brake caliper clearance before mounting the wheel and tire assembly.
Confirm the hub bore before buying.
Key features
- Split-spoke face
- Matte black finish
- 5 on 5 bolt pattern
- Center bore 83
- Offset 0
Hub-centric fit basics
A wheel can be centered by its bore or by its lug studs. Hub-centric wheels rely on the center bore sitting snugly over the hub, which carries the weight and reduces vibration. If the wheel bore is larger than the hub, hub-centric rings made to fill the gap can restore proper centering without changing the stud pattern.
A wheel bore smaller than the hub will not seat, so the measurement should be taken before ordering. Clean the hub face and remove any rust or paint so the wheel sits flat. Lug nuts should then be torqued in a star pattern, and the torque re-checked after the first few drives.
- A bore smaller than the hub will not fit
- Larger bores need hub-centric rings
- Clean the hub face before mounting
- Torque in a star pattern and re-check
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA7031-8973 |
| Diameter | 18 inches |
| Width | 9 inches |
| Bolt pattern | 5 on 5 |
| Center bore | 83 |
| Offset | 0 |
| Backspacing | 5 |
| Style | Split spoke |
| Finish | Matte black |
| Construction | Aluminum |
| Series | 31 Series Stryker |
Vehicle fitment
The universal fit label does not replace a hub check. Confirm the 5 on 5 pattern and the 83 center bore on the truck, then check the 0 offset against the fender.
Select tires that suit an 18-inch rim that is 9 inches wide. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One wheel. No cap is included.











