Overview
The Pro Comp 40 Series Vertigo 17×9 wheel, part number PXA9640-7983, is a 17-inch aluminum split spoke wheel with a 9-inch width and a matte bronze finish. Its bolt pattern is either 6 on 5 or 6 on 5.5, so confirm the layout against your hub before ordering.
The wheel has a 108 center bore, an offset of -6 and a backspacing of 4.75. It is built with low-pressure casting for performance trucks and sport utility vehicles, and it is universal fit with no vehicle tied to it.
Key features
- Low-pressure cast aluminum
- 17 inches in diameter, 9 inches wide
- Center bore 108
- Offset -6 with backspacing 4.75
- Split spoke design
- Matte bronze finish
Confirming the bolt pattern
Bolt pattern is the first measurement to confirm on any wheel. A 6 on 5 and a 6 on 5.5 layout look close on a printed page, but the lug holes sit at different spacing, so the wheel will not seat on the wrong hub. Measuring the lug holes with a caliper gives a clear answer before buying.
Once the pattern is verified, check the center bore and the seat type of the lug nuts. A wheel that centers on the hub relies less on the studs and is easier to balance cleanly. Offset and backspacing decide the rest of the fit, so confirm spoke clearance to the caliper and fender for the setup you plan to run.
- Measure lug hole spacing before ordering
- Compare the hub bore with the wheel bore
- Check caliper clearance with the tire mounted
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA9640-7983 |
| Wheel diameter | 17 inches |
| Wheel width | 9 inches |
| Bolt pattern | |
| Center bore | 108 |
| Offset | -6 |
| Backspacing | 4.75 |
| Style | Split spoke |
| Finish | Matte bronze |
| Construction | Aluminum |
| Series | 40 Series Vertigo |
Vehicle fitment
The wheel has no vehicle list and is universal fit. Because the bolt pattern is printed two different ways, match the hub to the specification and the title before choosing this size.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The -6 offset and 4.75 backspacing change how the wheel sits against the brake caliper, so measure clearance before mounting. Confirm the bolt pattern at the same time.
What’s included
The package is one 17×9 matte bronze wheel. Review the package contents against your installation plan before mounting.













