Overview
The Pro Comp 42 Series Blockade 20×9.5 wheel, part number PXA8142-29526, is a 20-inch aluminum split spoke wheel that is 9.5 inches wide. Its bolt pattern is 5 on 5.5 with 5 on 150 also listed, and the finish is gloss black with a milled look, named in the series as gloss black and milled.
The wheel has a 110 center bore, a -6 offset and a backspacing of 5. It is built with low-pressure casting and carries a load rating of 2500 to 3650 lbs per wheel. It is universal fit and is not assigned to a vehicle.
Key features
- Low-pressure cast aluminum
- 20-inch diameter and 9.5-inch width
- 5 on 5.5 bolt pattern, with 5 on 150 also listed
- Center bore 110
- Offset -6 with backspacing 5
- Gloss black with milled finish
Load rating and tire fit
A load rating describes how much weight one wheel is designed to carry under its stated conditions. It is one of several figures to compare with the vehicle’s axle load and the tire’s load index. Both the wheel and tire must handle the load, and the lower of the two limits the setup. Check both before mounting.
Dual bolt patterns on a single wheel are a fit consideration more than a strength one. Only one pattern matches a given hub, so the pattern should be confirmed by measuring the hub studs. Keep the lug nut seat type matched to the wheel’s bolt holes.
Gloss black milled finishes show scratches and brake dust. Clean the face with a mild, non-abrasive cleaner and a soft brush, and avoid strong acids that can dull the milled areas. Inspect the bead seat and valve area when mounting a tire to confirm no damage occurred during shipping.
- Compare wheel load rating with the axle and tire load index
- Measure the hub to confirm which bolt pattern applies
- Clean milled areas with a soft brush and mild cleaner
- Inspect the bead seat before mounting a tire
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA8142-29526 |
| Wheel diameter | 20 inches |
| Wheel width | 9.5 inches |
| Bolt pattern | 5 on 5.5 (also 5 on 150) |
| Center bore | 110 |
| Offset | -6 |
| Backspacing | 5 |
| Load rating | 2500 to 3650 lbs per wheel |
| Style | Split spoke |
| Finish | Gloss black, milled |
| Construction | Aluminum |
| Series | 42 Series Blockade |
Vehicle fitment
No vehicle is named for this 20×9.5 Blockade, and the fitment is universal. Confirm the 5 on 5.5 and 5 on 150 layouts against your hub, and check the -6 offset against fender and brake clearance.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The listed bolt patterns mean the wheel must be checked against both five-lug layouts before mounting. A 9.5-inch width changes tire fit, so confirm the tire size with the wheel on the hub.
Both five-lug layouts are listed, so the hub must match either the 5 on 5.5 or the 5 on 150 pattern. The 9.5-inch width changes tire fit, and the -6 offset with 5 backspacing sets the position of the wheel face against the caliper.
What’s included
One 20×9.5 gloss black milled wheel is included. Check the package contents against your installation before starting.












