Overview
The Pro Comp K2197B is a 6-inch radius arm kit with front and rear ES9000 shocks for the 2014 to 2018 Ram 2500. The front uses coil springs with radius arm drop brackets, and the rear uses coil spring spacers. The kit includes a drop track bar bracket, and its finish is black.
The kit is a direct fit for the 2014 to 2018 Ram 2500. Pro Comp builds its suspension kits around cast and CNC-machined knuckles and laser-cut, CNC-formed cross members.
The rear coil spring spacers raise the rear axle to match the front, which helps the truck sit level under load. Owners who want to keep the factory rear coil springs in place will find spacers a simpler change than replacing the rear springs, and the kit’s ES9000 shocks are fitted at both ends.
Key features
- 6-inch lift
- Front and rear ES9000 shocks
- Front coil springs with radius arm drop brackets
- Rear coil spring spacers
- Drop track bar bracket
- Black finish
Before you buy
A radius arm drop changes how the front axle is located, so the arms, coil springs and brackets work together as one system. When comparing setups for a Ram 2500 at this ride height, look at how the front and rear lift levels match. A mismatch can leave the truck sitting uneven under load. Rear coil spring spacers are the simpler change when the factory rear coils stay in place, but they still move the rear axle and affect driveline angles.
Plan for the parts that often change with a lift like this. Track bar geometry, brake hose length and sway bar links may need checking, and worn bushings are often replaced during the same job. Before installation, inspect the shocks, ball joints and control arm bushings, and look for leaking seals, cracked rubber and uneven tire wear. After the first few drives, recheck the bracket and shock bolts and keep an eye on alignment.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K2197B |
| UPC | 700008182671 |
| Type | Suspension lift kit with shocks |
| Lift height | 6 inches |
| Front shocks | ES9000 |
| Rear shocks | ES9000 |
| Finish | Black |
| Fitment | Direct fit |
Vehicle fitment
The kit fits the 2014 to 2018 Ram 2500 in Big Horn, Laramie, Laramie Limited, Laramie Longhorn, Limited, Lone Star, Outdoorsman, Power Wagon, SLT and Tradesman trims.
The Ram 3500 is not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The radius arm drop changes the front suspension geometry, so have the alignment checked after installation. Check the driveline angles on the rear as well, because the rear spacers raise the axle.









