Overview
The Pro Comp K2199B is a 6-inch stage 2 radius arm kit with front and rear ES9000 shocks for the 2014 to 2018 Ram 2500. The stage 2 version uses replacement radius arms at the front, with coil springs, and the rear uses coil spring spacers. The kit includes a drop track bar bracket and has a black finish.
The kit is a direct fit for the 2014 to 2018 Ram 2500. It is designed to keep steering geometry in line at the new ride height.
Stage 2 kits replace the factory radius arms, which gives the front suspension a new set of arms at the higher ride height. The rear coil spring spacers and the drop track bar bracket complete the lift, and the ES9000 shocks are fitted front and rear. Pair the kit with a front alignment, since the arm geometry changes at the new height.
Key features
- 6-inch lift
- Replacement radius arms at the front
- Front and rear ES9000 shocks
- Rear coil spring spacers
- Drop track bar bracket
- Black finish
Stage 2 setup notes
Replacing the factory radius arms makes the front suspension a more complete system than a drop alone. The arms set caster and pinion angle, so the new geometry should be measured rather than guessed. Ask for an alignment that includes caster and toe, and make sure the steering wheel is centered before the first drive. Steering stabilizers and tie rod ends are worth inspecting while the front end is apart.
Stage 2 setups also change the way the front end moves over bumps, so pay attention to steering feel for the first several drives. Worn bushings, loose fasteners and play in the joints show up quickly on a truck at this height. Pair the arms with fresh bushings if the old ones are worn, since new arms on old joints can hide problems. Recheck bolts after the first trail runs and note any clunks or wandering.
- Check caster and toe after installation
- Inspect steering stabilizer and tie rod ends
- Recheck fasteners after the first trail runs
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K2199B |
| UPC | 700008182691 |
| Type | Stage 2 radius arm suspension kit |
| Lift height | 6 inches |
| Front shocks | ES9000 |
| Rear shocks | ES9000 |
| Finish | Black |
| Fitment | Direct fit |
Vehicle fitment
Trims covered on the 2014 to 2018 Ram 2500 are Big Horn, Laramie, Laramie Limited, Laramie Longhorn, Limited, Lone Star, Outdoorsman, Power Wagon, SLT and Tradesman.
The Ram 3500 and the K2197B radius arm kit are separate. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Replacing the front radius arms changes the suspension geometry, so have the front alignment and steering set after installation.









