Overview
The Pro Comp K6006B is a 6-inch Stage 1 suspension lift kit with ES9000 series rear shocks for the 2004–2015 and 2017–2018 Nissan Titan. The kit uses high strength extended steering knuckles that maintain OE geometry, and heavy duty one-piece front crossmembers with bump stop pads.
The rear is lifted with 4-inch tall tapered lift blocks. 1-inch front bumper spacers provide clearance for 35-inch tall tires on 18 to 20 inch rims with up to 5 inch back spacing. The kit is FMVSS126 compliant for use with factory stability control, and it does not fit XD models.
Key features
- 6-inch lift height from a Stage 1 kit
- High strength extended steering knuckles
- Heavy duty one-piece front crossmembers
- Bump stop pads on the front crossmembers
- 4-inch tall tapered lift blocks at the rear
- 1-inch front bumper spacers
Stage 1 lift considerations
Stage 1 kits are a common first step for a truck that sees mixed road and trail use. Extended knuckles and front crossmembers change the front geometry, so the steering and suspension angles need to be set after the work is finished. Plan on a shop visit for the alignment rather than trying to set it by feel.
Rear blocks raise the axle without changing the leaf or coil arrangement. Over time the bolts and U-bolts can loosen, so re-torque them after the first few drives and recheck during regular service. Driveline angles can also change, so look for vibration at highway speed.
Check the brake lines and the ABS sensor wiring when the front geometry changes, since they can be stretched or pinched at full steering lock. Bump stops and crossmember bushings should be inspected for cracking and compression as the vehicle ages.
- Re-torque rear block hardware after the first drives
- Inspect brake hoses at full steering lock
- Check bump stop pads for wear
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K6006B |
| UPC | 700008461961 |
| Lift height | 6 inch (lift height range 4 to 6 inches) |
| Lift kit stage | Stage 1 |
| Rear lift | Block |
| Lift block height | 4 inch tapered |
| Rear shocks | ES9000 series |
| Front bumper spacers | 1 inch |
| Tire clearance | 35-inch tall tires on 18 to 20 inch rims with up to 5 inch back spacing |
Vehicle fitment
This kit covers the 2004–2015 and 2017–2018 Nissan Titan in the LE, PRO-4X, Platinum Reserve, S, SE, SL, SV and XE versions. The 2016 model year and XD models are not covered. Confirm your vehicle’s year, model and trim before ordering.
The list has a gap at the 2016 model year, and it does not cover XD models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The extended knuckles and front crossmembers change the front geometry, so have the alignment checked and the brake lines inspected after installation.
What’s included
The kit includes the high strength extended steering knuckles, the one-piece front crossmembers with bump stop pads, the 4-inch tapered lift blocks, the 1-inch front bumper spacers, and ES9000 series rear shocks.






































