Overview
The Pro Comp K2103T is a 6-inch stage 1 suspension system with PRO-X front and rear shocks for the 2019–2026 Ram 1500. The lift height range is 6 to 7 inches, the shocks are included, and the rear lift uses coil spacers.
The system includes a Pro Comp-engineered knuckle for the 2019 Ram 1500 platform, designed with steering geometry, reduced weight and an improved turning radius compared with the previous generation. Robust crossmembers, diff drops and sway bar drops work with the knuckle to keep critical components at factory operating angles.
Key features
- Pro Comp-engineered knuckle for the 2019 Ram 1500 platform
- Robust crossmembers, diff drops and sway bar drops
- Rear geometry correction brackets and coil spacers, which Pro Comp says keep the factory load-carrying capacity
- Compatible with factory stability control and adaptive cruise control.
- PRO-X front and rear shocks, included
Choosing tires and wheels
Tire choice affects how a lift performs, and a larger tire changes gearing, braking load and the amount of clearance at full steering lock. Wheel offset and backspacing decide how far the tire sits in the fender, so check both before buying wheels for a new setup.
Driver assistance systems depend on the front geometry staying where it was set at the factory. After a lift and alignment, forward-facing sensors and cameras may need to be checked and aimed, and adaptive cruise control should be tested at low speed before highway use. Recheck tire pressure and load ratings after any size change.
- Check offset and backspacing before buying wheels
- Test steering lock for rubbing with the final tires
- Re-aim front sensors after alignment work
- Recheck clearance after any wheel or tire change
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K2103T |
| Suspension type | Lift kit, 6-inch stage 1 |
| Lift height | 6 inches, listed range 6–7 inches |
| Front shocks | PRO-X |
| Rear shocks | PRO-X, included |
| Rear lift component | Coil spacer |
| Tire size | 37 inches, listed |
| Shocks included | Yes |
Vehicle fitment
It fits the 2019–2026 Ram 1500 in the Big Horn, HFE, Laramie, Laramie Longhorn, Limited, Limited Longhorn, Lone Star, Longhorn, Rebel, Special Service, TRX, TRX Launch Edition and Tradesman versions.
It fits 2019 through 2026 Ram 1500 models only. Verify your truck’s year, model and trim against this fit before purchasing.
Installation notes
The 37-inch tire clearance is the figure to check against the wheels and tires you plan to run. Because the rear uses coil spacers and geometry correction brackets, check the driveline angles and alignment once the kit is installed, and recheck clearance after any wheel or tire change.
What’s included
PRO-X front and rear shocks, the Pro Comp knuckles, crossmembers, diff drops and sway bar drops, plus the rear coil spacers and geometry correction brackets described in Pro Comp’s description of the system.













