Overview
The Pro Comp K5072B is a 6-inch Stage 1 bracket-type lift kit with ES9000 shocks in the product name. It uses front and rear crossmembers and compression struts, with torsion bar drop brackets at the front and rear coil springs for the lift.
Front sway bar links, bump stop extensions and upper control arm mount brackets are included. The steering correction is a steering drop and centerlink. The front shocks are ES9000 units.
Key features
- 6-inch lift height from a Stage 1 kit
- Front and rear crossmembers
- Compression struts
- Torsion bar drop brackets
- Upper control arm mount brackets and bump stop extensions
- Steering drop and centerlink, and rear coil springs
Bracket lifts and the front
Bracket-type lifts use separate brackets to reposition suspension mounting points rather than replacing the knuckle or control arm geometry. Torsion bar drop brackets lower the torsion bar mount to raise the body, while upper control arm mount brackets relocate a pivot point. Each approach changes the front geometry in its own way, so measure the result after installation.
A steering drop and centerlink change the tie rod position and steering geometry, so the steering feel and joint play should be checked after the first few drives. Alignment should be set once the lift is complete, and the driveshaft angles should be measured as well.
Compression struts and front and rear crossmembers hold the new geometry in place, so inspect the bolts and bushings at each service.
- Check steering feel after the first drives
- Inspect joints for play
- Set alignment after the lift is complete
- Measure driveshaft angles
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K5072B |
| UPC | 614901207392 |
| Lift height | 6 inch (lift height range 5 to 6.99 inches) |
| Lift kit stage | Stage 1 |
| Suspension type | Bracket |
| Front control | Front and rear crossmembers and compression struts |
| Steering correction | Steering drop and centerlink |
| Rear lift | Coil springs |
| Front shocks | ES9000 |
Vehicle fitment
Vehicle coverage should be confirmed against your year, model and trim before buying.
Do not assume coverage from the bracket type or the shock name alone. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Torsion bar drop brackets and the steering drop change the front geometry, so have the alignment set and the driveline angles checked after installation.
What’s included
The kit includes front and rear crossmembers, compression struts, torsion bar drop brackets, upper control arm mount brackets, front sway bar links, bump stop extensions, the steering drop and centerlink, rear coil springs, and ES9000 front shocks.









