Overview
The K5058B is a 3-inch Stage 1 leaf spring lift kit with ES3000 front and rear shocks. It fits the 1984–1985 Toyota 4Runner and the 1979–1985 Toyota Pickup, and the front uses leaf springs with bump stop extensions for the lift.
The rear is raised with add-a-leafs, and the steering correction in this kit is brake line extension brackets rather than a steering component. Shock boots are not included, so order them separately if you want them with the ES3000 shocks.
Key features
- 3-inch lift height from a Stage 1 kit
- Front leaf springs
- Bump stop extensions
- Brake line extension brackets
- Rear add-a-leafs
- ES3000 front and rear shocks
How leaf spring lifts work
Leaf springs carry the load on a solid axle, and a lift changes how they flex. Front leaves set the height at the axle, while add-a-leafs add a layer at the rear to hold the back up under load. Together they raise the truck without changing the basic spring design, which many owners prefer for simple service.
Leaf packs wear with heat, load and time. Check the spring eyes, shackles and U-bolts for cracks, gaps and rust, and look for leaves that have shifted out of position. Many owners replace bushings and shackles when the springs come out, since the old parts are often close to the end of their life.
- Inspect spring eyes and shackles
- Check U-bolts for rust and looseness
- Replace worn bushings during the install
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K5058B |
| UPC | 614901207262 |
| Lift height | 3 inch (lift height range 3 to 4.99 inches) |
| Lift kit stage | Stage 1 |
| Suspension type | Leaf spring |
| Front lift | Leaf springs |
| Rear lift | Add-a-leaf |
| Front shocks | ES3000 |
| Rear shocks | ES3000 |
| Shock boots | Not included |
Vehicle fitment
It fits the 1984–1985 Toyota 4Runner in the DLX and SR5 versions, and the 1979–1985 Toyota Pickup in the Base, DLX, DLX Turbo and SR5 versions.
Only the 1979 through 1985 Pickup years and the 1984 and 1985 4Runner years are included, so the 1986 and newer trucks are not covered by this entry. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Add-a-leafs change the rear spring rate and height, so check the rear suspension after installation and confirm the alignment and the driveline angles on the truck.
What’s included
The kit includes the front leaf springs, bump stop extensions, brake line extension brackets, the rear add-a-leafs, and ES3000 front and rear shocks.
Not included: shock boots.









