Overview
The Pro Comp K1175E is a 6-inch stage 1 lift kit with rear shock extensions for 2019–2021 Chevrolet Silverado 1500 and GMC Sierra 1500 trucks, and for the 2022 GMC Sierra 1500 Limited. The lift height range is 6 to 7 inches, and the rear shocks are performance units from the Performance Race Series.
The 2019 Silverado and Sierra use a new chassis with extended steering knuckles that keep factory steering geometry. The front lower crossmembers and differential skid plate are 3/16-inch steel plate, and upper strut spacers keep the factory-tuned struts in place. The kit is designed for 20-inch or larger wheels and 35-inch tires for all-terrain use.
Key features
- Extended steering knuckles that keep factory steering geometry
- Front lower crossmembers and a differential skid plate of 3/16-inch steel plate
- Upper strut spacers that keep the factory-tuned struts
- Rear lift blocks and U-bolts that Pro Comp says give a level stance
- Built for 20-inch or larger wheels and 35-inch tires
Clearance and rub checks
Larger tires leave less room at the fenders, the inner wheel well and the steering stops. A rub can show up on turns, during suspension compression or when the truck is loaded. Checking clearance at full lock and with the suspension cycled through its travel helps find trouble before it causes damage.
Shock extensions and performance rear shocks change how the rear sits at full extension and compression. Rub points near the frame, the leaf spring or the shock body should be inspected after installation. Trimming plastic liners or relocating a rubbing wire are common fixes when clearance is tight.
- Test full lock with the wheels fitted
- Inspect fender liners and inner wheel wells
- Check the rear shock bodies at full extension
- Look for rub marks on the frame and brake lines
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K1175E |
| Suspension type | Lift kit, stage 1 |
| Lift height | 6 inches, listed range 6–7 inches |
| Rear shocks | Performance shocks, Performance Race Series |
| Rear lift component | Block and U-bolt |
| Skid plate and crossmembers | 3/16-inch steel plate |
| Wheel and tire size | 20-inch or larger wheels, 35-inch tires |
Vehicle fitment
It fits the 2019–2021 Chevrolet Silverado 1500 in the Custom, LT, LTZ, RST, SSV and WT versions, the 2019–2021 GMC Sierra 1500 in the Base, Elevation, SLE and SLT versions, and the 2022 GMC Sierra 1500 Limited.
The kit is designed for 2019 GMC Denali trucks with Adaptive Ride Control. It should not be used on trucks with factory base suspension packages, Chevrolet Custom or LT Trail Boss models with a 2-inch factory lift, or GMC AT4 trucks with a 2-inch factory lift. Match the year, model and trim on your truck before buying.
Installation notes
The kit changes the front end through its steering knuckles and crossmembers, so have the alignment and driveline angles checked after installation.
What’s included
Extended steering knuckles, front lower crossmembers, differential skid plate, upper strut spacers, rear lift blocks, U-bolts and the rear shock extensions with performance shocks.























