Overview
The Pro Comp K2075BPS is a 6-inch suspension kit for 4WD Dodge Ram 1500 trucks. It fits the 2009 to 2010 Dodge Ram 1500 and the 2011 Ram 1500 in several trims, including Laramie, SLT, ST, Sport and TRX. It is a direct fit, and its lift range is 5 to 6.99 inches.
The kit replaces the front steering knuckles and adds crossmembers and Pro Runner struts up front. At the rear, it uses lift blocks and Pro Runner shocks. Front sway bar spacers and bump stop extensions round out the front of the system, so the truck’s suspension geometry is maintained as the ride height goes up.
Key features
- Front lift steering knuckles and crossmembers
- Pro Runner struts on the front axle
- Front sway bar spacers and bump stop extensions
- Rear lift blocks
- Pro Runner shocks at the rear
- Pro Comp says its kits are designed to keep steering geometry and suspension performance intact
Alignment and driveline after a lift
A 4WD truck with a lift of this type changes the angle of its driveline and the geometry of the front axle. Those angles affect vibration, u-joint wear and steering feel, so a truck that rides higher often needs more attention to the driveshaft and axles than it did when stock. Vibration at highway speed is a sign the angles need correction.
Tires and wheels deserve a check too. A taller ride height can change clearance at the fenders and inner liner, and rubbing at full steering lock or over bumps wears tires and hardware quickly. Recheck brake hose length and sensor wires after installation, since the front end moves when the ride height changes.
- Watch for driveline vibration at speed
- Check tire clearance at full lock
- Inspect brake hoses and sensor wires
- Recheck shock and bump stop contact after the first drives
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K2075BPS |
| UPC | 70000800360 |
| Type | Bracket and knuckle suspension kit |
| Lift height | 5 to 6.99 inches, a 6-inch lift kit |
| Front shocks | Pro Runner struts |
| Rear lift | Spacers and lift blocks |
| Shocks | Included |
| Drivetrain | 4WD models |
| Fitment | Direct fit |
Vehicle fitment
It fits the 2009 to 2010 Dodge Ram 1500 and the 2011 Ram 1500, in Laramie, SLT, ST, Sport, TRX and TRX4 trims. The 2011 model year also covers Big Horn, Laramie Longhorn, Outdoorsman and Tradesman.
The 2012 and later Ram 1500 and the 2WD trucks are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit includes new front knuckles, so installation involves front-end disassembly. Plan on an alignment afterward and check the driveline angles on a lifted 4WD truck.






























