Overview
The Pro Comp 4-inch Lift Kit, part number EXPK2090T (kit K2090T), is a suspension lift for 2013 to 2018 Ram 3500 pickups. It is an all-new kit for the Ram 3500 built on the Radius Arm Suspension design.
It is a direct fit for the 2013 to 2018 Ram 3500 in the Big Horn through Tradesman trims, including Laramie Longhorn and Limited.
Confirm the tire size, shock type and lift height range for your setup before choosing wheels, tires and shocks.
Planning a radius arm setup
A radius arm system controls axle position and handles drive and braking forces, so the geometry it sets affects ride, steering and wear. When the body is raised, the arms change angle, which means the mounting points and bushings carry more load than they did at stock height. Planning the full setup before starting helps avoid surprises in the middle of the job.
Tire diameter, wheel offset and shock length all interact with a lift. Larger tires can rub at full steering lock or under load, so clearance should be checked with the truck loaded and turned. Many owners review brake hoses and driveline angles at the same time, since both are affected by ride height.
- Check wheel offset before choosing tires
- Inspect the frame mounts at each oil change
- Confirm steering lock after the first install
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | EXPK2090T |
| Kit code | K2090T |
| Suspension type | Lift kit with radius arm suspension |
| Lift | 4 inches |
| Fit type | Direct fit |
Vehicle fitment
It fits the 2013 to 2018 Ram 3500 in the trim packages named above.
The list covers Ram 3500 pickups only. Confirm your vehicle’s year, model and trim before ordering.
What’s included
The kit is a 4-inch lift with radius arm suspension components. Check the package contents against your installation before starting.













