Overview
The K2079M is a 6-inch short arm lift kit with PRO-M front and rear shocks for the 2009–2010 Dodge Ram 2500 and Ram 3500. The lift height range is 6 to 7 inches, and the shocks come with the kit.
The rear is lifted with a block/spacer method that uses block and U-bolt components. The short arm design is the core of the kit, and it is a direct fit for the 2009 and 2010 heavy-duty Dodge Ram pickups in its coverage.
Key features
- 6-inch short arm design
- PRO-M front shocks and PRO-M rear shocks, included
- Block/spacer rear lift method
- Block and U-bolt rear lift components
- Lift height range of 6 to 7 inches
Heavy-duty alignment and driveline
A short arm kit moves the upper and lower control arm geometry, so the caster, camber and toe settings change once the truck is raised. On a heavy-duty Ram, that shift is easy to feel in the steering wheel, and a fresh alignment is the most reliable way to restore straight tracking. Have the front end set on a rack and record the readings before and after the work.
The rear block and U-bolt setup changes the pinion angle, which affects vibration and wear on the driveshaft U-joints. Heavy towing and loaded beds magnify these effects, so inspect the joints and the rear axle mounts after the first few weeks. Bump stops and brake lines also deserve a quick check, because the new ride height changes how they sit at full travel.
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K2079M |
| Suspension type | Lift kit, short arm |
| Lift height | 6 inches, listed range 6–7 inches |
| Front shocks | PRO-M |
| Rear shocks | PRO-M, included |
| Rear lift method | Block/spacer with block and U-bolt |
| Shocks included | Yes |
Vehicle fitment
It fits the 2009–2010 Dodge Ram 2500 in the Laramie, Power Wagon, SLT, ST, SXT and TRX versions, and the 2009–2010 Dodge Ram 3500 in the Laramie, SLT, ST and SXT versions.
Coverage ends with the 2010 model year, so 2011 and newer Ram 2500 and 3500 trucks, as well as the Ram 1500, are outside it. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
A short arm kit changes the front suspension geometry on a heavy-duty Dodge, and the block and U-bolt rear lift changes the driveline angles. Check both, along with the alignment, after installation.
What’s included
PRO-M front and rear shocks, the block and U-bolt rear lift components, and the short arm parts for this kit.













