Select your vehicle
-13%

Pro Comp 4″ Lift Kit with PRO-X Shocks – K2089T

Pro Comp Suspension

Shop Ram 3500 Lift Kits on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Fits 2013 to 2018 Ram 3500 trucks
  • 4-inch lift with radius arm suspension
  • PRO-X front and rear shocks included
  • Block and spacer rear lift

Description

Overview

The Pro Comp 4-inch Lift Kit with PRO-X Shocks, part number EXPK2089T (kit K2089T), is a suspension lift for 2013 to 2018 Ram 3500 trucks. It is built for the Ram 3500 and its radius arm suspension design.

The specifications list a 4-inch lift with a lift height range of 4 to 5.5 inches. PRO-X shocks are included at the front and the rear. The rear uses a block or spacer method.

Key features

  • 4-inch suspension lift
  • Radius arm suspension design
  • PRO-X shocks at the front and rear, included
  • Block or spacer rear lift
  • Lift height range of 4 to 5.5 inches

Radius arm lift considerations

Radius arms locate the axle front to back and handle braking and acceleration loads, so changing ride height changes their angle. A lift can shift the pinion angle, which affects driveline vibration and U-joint life. These changes are normal, but they should be checked before the truck goes on long highway trips.

Front and rear shocks both work with the new ride height, so keeping a matched set makes the ride more predictable on rough roads. Heavy-duty trucks often carry trailers or loads, so tire pressure and load should be kept in mind after a lift. Bushings and mounts deserve a look at each service interval.

  • Check driveline angles after the lift
  • Inspect radius arm bushings for cracks
  • Verify front alignment during the first week of driving

Specifications

Brand Pro Comp Suspension
Part number EXPK2089T
Kit code K2089T
Suspension type Lift kit
Lift height 4 inches; range 4 to 5.5 inches
Rear lift method Block or spacer
Shocks included Yes
Front shocks PRO-X
Rear shocks PRO-X
Fit type Direct fit

Vehicle fitment

It fits the 2013 to 2018 Ram 3500 in the Big Horn, Laramie, Laramie Limited, Laramie Longhorn, Limited, Lone Star, SLT, ST and Tradesman versions.

The list covers Ram 3500 trucks only, not the Ram 2500 or Ram 1500. It does not include 2012 and earlier or 2019 and newer Ram 3500 models. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

A radius arm suspension changes the front and rear geometry, so the alignment and the driveline angles should be checked once the Ram 3500 is lifted.

What’s included

The 4-inch lift kit with PRO-X front and rear shocks.

SKU: EXPK2089T Categories: ,

Fitment

VehicleYearsTrims
Ram 35002013–2018Big Horn, Laramie, Laramie Limited, Laramie Longhorn, Limited, Lone Star, SLT, ST, Tradesman

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the Pro Comp EXPK2089T fit a 2016 Ram 3500?

Yes. This kit fits 2013 to 2018 Ram 3500 trucks, and a 2016 model falls within that span. Check your trim against the versions named above before ordering.

Will it fit a Ram 2500?

No. It is made for the Ram 3500 only, so the Ram 2500 is not covered by this kit. Confirm the model on your truck before ordering, since the parts are matched to the Ram 3500 layout.

Are shocks included?

Yes. PRO-X shocks are included at the front and the rear. PRO-X shocks are listed at both the front and rear of the truck.

Do the radius arm bushings need replacing when a lift is installed?

Not always, but they should be inspected during installation. Worn or split bushings can allow the axle to shift under braking, so replacing them while the arms are accessible is a common choice.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Ram 3500 Lift Kits on Amazon