Overview
The Pro Comp 46 Series Prodigy 18×9 wheel, part number PXA7046-8982, is an 18-inch aluminum spoke wheel that is 9 inches wide. It has an 8 on 6.5 bolt pattern and a satin black finish, named in the series as 46 Series in satin black.
The wheel has a 125 center bore, a 0 offset and a 5 backspacing. It is made with aerospace alloys using Counter Pressure Casting, and it includes center caps. The fit is universal, with no particular vehicle matched.
Key features
- Counter Pressure Casting.
- 18-inch diameter, 9-inch width
- 8 on 6.5 bolt pattern
- Center bore 125
- Offset 0 with backspacing 5
- Satin black spoke design
Eight-lug hub measurements
An 8 on 6.5 pattern uses a different bolt circle from 8 on 170, so an eight-lug wheel that looks similar may not seat on the same hub. Measure the bolt circle across opposite holes and confirm the center bore before a wheel is ordered. Heavier eight-lug trucks often run larger brakes, which makes caliper room the first thing to check.
Wheel studs and lug nuts carry the clamp load, so their condition matters as much as the wheel. Replace any stud that shows thread damage, and clean the mounting face before each mount. Use a torque wrench and recheck torque after the first short drive so the seats settle evenly.
Where a holed face traps mud, clean the spoke backs and stud area after off-road trips so debris does not build up near the mounting surface. Note any new vibration or noise, and have the hub and wheel checked before the next drive.
- Measure the bolt circle across opposite holes
- Clean the hub face before mounting
- Replace studs with thread damage
- Retorque after the first short drive
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA7046-8982 |
| Wheel diameter | 18 inches |
| Wheel width | 9 inches |
| Bolt pattern | 8 on 6.5 |
| Center bore | 125 |
| Offset | 0 |
| Backspacing | 5 |
| Style | Spoke |
| Finish | Satin black |
| Construction | Aluminum |
| Series | 46 Series |
Vehicle fitment
This eight-lug wheel is universal fit and is not matched to a vehicle. Confirm the 8 on 6.5 pattern and the 125 center bore before ordering, then check brake clearance for the 18-inch diameter.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
An 8 on 6.5 layout is not the same as an 8 on 170 layout, so compare the hub with the exact figures before mounting.
The 18-inch diameter and 9-inch width give the tire fitment envelope, so measure the caliper against those dimensions before ordering.
The Xtreme alloys combine aerospace alloys with Counter Pressure Casting, and the line suits sport utility vehicles. This eight-lug 8 on 6.5 version has a 125 center bore and a 0 offset with 5 backspacing.
An 8 on 6.5 layout is a different bolt circle from 8 on 170, so the hub has to be measured before the wheel is chosen. Confirm the caliper room and tire diameter once the wheel is mounted.
What’s included
Review the package contents before the wheel goes on the vehicle.









