Overview
The Pro Comp 41 Series Phaser 17×9 wheel, part number PXA3541-7973, is a 17-inch aluminum split spoke wheel that is 9 inches wide. It has a 5 on 5 bolt pattern and a machined black finish. Stainless steel bolts are included with this finish.
The wheel uses an 83 center bore, a -6 offset and a backspacing of 4.75. Its alloy is low-pressure cast. It is a universal fit design, so the hub and clearance decide the fit.
Key features
- Low-pressure cast aluminum
- 17-inch diameter, 9-inch width
- 5 on 5 bolt pattern
- Center bore 83
- Offset -6 with backspacing 4.75
- Machined black finish
- Stainless steel bolts listed with this finish
Bolts and galling
Stainless steel fasteners resist corrosion well, but they are prone to galling when threads are dry and tightened quickly. Galling can cause a bolt to seize or give a false torque reading. Clean the threads, check the thread pitch and use the lubricant your vehicle manual recommends, and avoid mixing stainless bolts with a different metal in the same hole.
Check the seat at the back of each bolt and make sure it sits flat in the wheel. A bolt that is too long can bottom out in the hub, and one that is too short leaves threads unengaged. Recheck torque after the first drive and inspect the threads when the wheel comes off.
- Clean threads before installing
- Check bolt length and seat
- Recheck torque after the first drive
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA3541-7973 |
| Wheel diameter | 17 inches |
| Wheel width | 9 inches |
| Bolt pattern | 5 on 5 |
| Center bore | 83 |
| Offset | -6 |
| Backspacing | 4.75 |
| Style | Split spoke |
| Finish | Machined black |
| Bolts | Stainless steel |
| Construction | Aluminum |
| Series | 41 Series Phaser, machined face |
Vehicle fitment
This 17×9 wheel is a universal fit design with no vehicle assigned. Match the 5 on 5 bolt pattern and 83 center bore to the hub, and confirm the -6 offset clears the brake caliper and fender.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Stainless steel bolts are listed with this finish, so check that the bolt seat and length suit the wheel before mounting. Confirm the offset clearance with the wheel on the hub.
The machined finish is a visual detail. Fit depends on the 5 on 5 bolt pattern, the 83 center bore and the -6 offset, so confirm those before mounting.
What’s included
One 17×9 wheel in machined black with stainless steel bolts is included. Verify the contents against your installation before starting.













