Overview
The Pro Comp PXA7069-5883 is a 15×8 flat black aluminum wheel from the Pro Comp 69 Series Vintage line, with a Holes style face and a 6 on 5.5 bolt pattern. It is sold as one wheel with a center bore of 108 and an offset of -19.
The Vintage alloys are low-pressure cast, which keeps the wheel light for its size and gives the flat black finish a clean, even look. The high offset design moves the rim inward toward brake clearance on trucks and SUVs.
Key features
- Low-pressure cast aluminum
- Holes style face
- 15-inch diameter, 8-inch width
- 6 on 5.5 bolt pattern
- Center bore of 108
- Offset -19 with 3.75 backspacing
Caring for flat black coatings
Flat black coatings are more prone to scuffs than gloss finishes, because light scratches show as lighter marks on the surface. Clean with mild soap, a soft brush and clean water. Avoid abrasive pads, stiff wire brushes and harsh wheel cleaners, which can wear away the color and expose bare metal in spots over time.
Trail dirt and road salt can sit in the spoke recesses, so rinse the wheel after each muddy run and dry it fully. Inspect the spoke roots and the inner barrel for hairline cracks, and check the bead seal after any tire repair. Touch-up paint designed for aluminum wheels can cover small chips before corrosion starts. Keep the wheel within its rated size range and avoid mixing tire types on the same axle.
- Rinse spoke recesses after muddy runs
- Touch up chips before corrosion starts
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA7069-5883 |
| Series | 69 Series Vintage (Classic) |
| Style | Holes |
| Construction | Aluminum |
| Finish | Flat black |
| Diameter | 15 inches |
| Width | 8 inches |
| Bolt pattern | 6 on 5.5 |
| Center bore | 108 |
| Offset | -19 |
| Backspacing | 3.75 |
Vehicle fitment
This wheel is not built for one model. A six-lug 5.5 hub with a 108 center bore is the first match, then check the -19 offset at the caliper and fender with the tire mounted.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Mount this wheel only to a six-lug hub at 5.5. A test fit with the tire mounted shows whether the rim clears the brake parts at the -19 offset. Six lug holes on a 5.5 spacing must line up with the hub, and the 108 center bore should seat on the hub pilot. Check the -19 offset against the caliper with the tire mounted.
What’s included
One 15×8 aluminum wheel. Check the package contents against your installation before starting.











