Overview
The Pro Comp PXA1069-6182 is a 16×10 polished aluminum wheel from the Pro Comp 69 Series Vintage line, with a Holes style and an 8 on 6.5 bolt pattern. It is sold as one wheel with a center bore of 125 and an offset of -25.
The 69 Series is cast with low-pressure casting technology, and this wheel has a maximum load of 3,420 pounds. The 10-inch width, -25 offset and 4.5 backspacing place the tire outboard of the mounting face, which provides brake clearance on trucks and SUVs used off road.
Key features
- Low-pressure cast aluminum construction
- Holes style face
- 16-inch diameter, 10-inch width
- 8 on 6.5 bolt pattern with a center bore of 125
- Offset -25 with 4.5 backspacing
- Polished finish with a maximum load of 3,420 pounds
Choosing the right setup
Wheel offset and backspacing decide where the tire sits relative to the suspension and brakes, so they matter as much as the bolt pattern. A wheel with a negative offset pushes the tire outward, which can change steering feel and bring the tire closer to the fender on a lifted vehicle. Before choosing a rim of this width, look at the tire’s section width, its load index and how much room the front and rear tires have at full lock.
Off-road use adds stress at the hub and bead seat. Rocks, ruts and sidewall impacts can bend a rim or loosen lug nuts, so inspect the wheel after each trip for cracks near the spokes, flat spots on the bead area and any air loss. Torque lug nuts in a star pattern and recheck them after the first few drives on a new wheel.
- Check tire size against the rim width before mounting
- Inspect bead seats and valve stems for leaks
- Carry a tire repair kit on longer trips
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA1069-6182 |
| Series | 69 Series Vintage (Classic) |
| Style | Holes |
| Construction | Aluminum |
| Finish | Polished |
| Diameter | 16 inches |
| Width | 10 inches |
| Bolt pattern | 8 on 6.5 |
| Center bore | 125 |
| Offset | -25 |
| Backspacing | 4.5 |
| Max load | 3,420 pounds |
Vehicle fitment
No vehicle is named for this wheel, so it is a universal design rather than a fit for a specific truck or SUV. An 8 on 6.5 hub with a 125 center bore is the first match, and the -25 offset needs a clearance check against the brake parts.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The 8 on 6.5 pattern must line up exactly with the hub, so measure before buying. Test-fit the 10-inch rim with the tire and caliper in place, since the -25 offset changes the clearance at the inner fender. The 8 on 6.5 spacing must match the hub exactly, and the 125 center bore has to seat on the hub pilot. A 10-inch rim with -25 offset places the tire well outboard, so check fender and brake caliper clearance with the tire mounted. The 4.5 backspacing sets the inner lip position, and the 3,420 pounds figure is the maximum load Pro Comp gives for this wheel.
What’s included
One 16×10 aluminum wheel. Check the package contents against your installation before starting.











