Overview
The Pro Comp PXA5164-218947 is a 20×10 aluminum Gunner eight-spoke wheel from the Pro Comp 64 Series, in satin black milled with an 8 on 180 bolt pattern. It is sold as one wheel with a center bore of 125 and an offset of -18.
The Gunner is a chiseled eight-spoke wheel with CNC-milled windows and a 3650-pound eight rating. This 10-inch-wide rim has a backspacing of 4.75, and it comes in 17- and 20-inch sizes. The Pro Comp Promise, a lifetime structural warranty, is transferable.
Key features
- Chiseled eight-spoke design
- CNC-milled windows
- 20-inch diameter, 10-inch width
- 8 on 180 bolt pattern
- Center bore of 125
- Offset -18 and backspacing 4.75
Signs a wheel needs attention
A wheel that is wearing or damaged usually shows warning signs before it fails. Vibration at highway speed can point to a bent rim, a loose lug, or a tire that has shifted on the bead. Uneven tire wear on one side can indicate that the offset or alignment is pulling the tire out of its normal path. Check the inner lip for scrapes from brake calipers and look for dents that could affect the bead seal.
Corrosion around the mounting face and the center bore can make the wheel harder to center on the hub, so clean and inspect those surfaces at each tire rotation. A slow leak from the bead area often comes from a bent edge or corroded seat rather than from the valve alone. If a wheel shows cracks, deep gouges or a bend, replace it before the next trail trip. Keep records of torque checks and any impacts.
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA5164-218947 |
| Series | 64 Series Gunner |
| Style | Gunner |
| Construction | Aluminum |
| Finish | Satin black milled |
| Diameter | 20 inches |
| Width | 10 inches |
| Bolt pattern | 8 on 180 |
| Center bore | 125 |
| Offset | -18 |
| Backspacing | 4.75 |
| Load rating | 3650 lbs (eight rating) |
| Finish warranty | Two years |
Vehicle fitment
No vehicle is named for this wheel, so the 8 on 180 hub with a 125 center bore sets the first check. Confirm the hub layout before comparing the -18 offset.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Mount only to an eight-lug hub at 180 with a 125 center bore. Test-fit the 10-inch rim with the tire on the vehicle to check caliper and fender clearance at the -18 offset. Eight lug holes on a 180 spacing are a specific layout, so measure the vehicle’s hub before buying. The 125 center bore must seat on the hub pilot, and the 10-inch width needs a tire that suits the rim. Check the -18 offset against fender and steering clearance with the tire mounted.
What’s included
The package holds a single 20×10 aluminum wheel.









