Select your vehicle

Pro Comp 41 Series Phaser Wheel, 17x9 with 6 on 5.5 Bolt Pattern – Matte Bronze – 9641-7983

Pro Comp Alloy Wheels

Shop Pro Comp Alloy Wheels 17x9 6x5.5 on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Pro Comp 41 Series Phaser 17×9, part number PXA9641-7983
  • 6 on 5.5 bolt pattern, center bore 108
  • Matte bronze split spoke wheel
  • Offset -6, backspacing 4.75

Description

Overview

The Pro Comp 41 Series Phaser 17×9 wheel, part number PXA9641-7983, is a 17-inch aluminum split spoke wheel that is 9 inches wide. It has a 6 on 5.5 bolt pattern and a matte bronze finish, and it is built with low-pressure casting.

The wheel has a 108 center bore, an offset of -6 and a backspacing of 4.75. The negative offset places the wheel face outward. It is a universal fit design, so match the bolt pattern and center bore to your hub.

Key features

  • Low-pressure cast aluminum
  • 17-inch diameter and 9-inch width
  • 6 on 5.5 bolt pattern
  • Center bore 108
  • Offset -6 with backspacing 4.75
  • Matte bronze split spoke finish

Caring for matte bronze

Matte finishes look different from gloss ones because they have no clear top layer to hide scuffs. Wash the wheel with a pH-neutral cleaner and a soft brush, and avoid abrasive pads that can polish or dull the surface unevenly. Dry the face after washing so brake dust and water spots do not settle into the texture.

Wax and aggressive degreasers often leave a sheen on matte surfaces, so skip them on the face. Inspect the outer lip after trail use for chips or scrapes, since rock contact often starts there. A small scuff can be cleaned, but a crack or bend means the wheel should be replaced.

  • Use a pH-neutral wheel cleaner
  • Skip wax on the wheel face
  • Inspect the lip after rough trails

Specifications

Brand Pro Comp Alloy Wheels
Part number PXA9641-7983
Wheel diameter 17 inches
Wheel width 9 inches
Bolt pattern 6 on 5.5
Center bore 108
Offset -6
Backspacing 4.75
Style Split spoke
Finish Matte bronze
Construction Aluminum
Series 41 Series Phaser

Vehicle fitment

No vehicle list applies to this matte bronze 17×9 wheel. A 6 on 5.5 hub with a 108 center bore is the match to confirm, and the -6 offset should be checked against brake and fender clearance.

Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Negative offset changes the position of the tire relative to the fender, so confirm the outer clearance once the wheel is on the hub. Test-fit before the first drive.

What’s included

One 17×9 wheel in matte bronze is included. Confirm the package contents against your installation before starting.

SKU: PXA9641-7983 Categories: ,

Questions & Answers

Does the PXA9641-7983 use a 6 on 5.5 pattern?

Yes. The bolt pattern is 6 on 5.5 and the center bore is 108. Confirm both against your hub before ordering the wheel for your vehicle.

Is this Phaser finished in matte bronze?

Yes. The finish is matte bronze, and the wheel is a split spoke design in aluminum. It is 17 inches in diameter and 9 inches wide.

What offset and backspacing does this wheel have?

The offset is -6 and the backspacing is 4.75. Check these against the clearance between the wheel, the brake caliper and the fender of your vehicle before mounting.

Can a matte bronze wheel be polished to remove scratches?

No. Polishing a matte finish creates shiny spots and uneven color. Clean the area gently and touch up small chips with matching paint if the wheel is otherwise sound.

How do I tell if the wheel needs replacing?

Replace the wheel if it shows cracks, bends or bubbling near the lip. Surface scuffs alone do not affect strength, but any structural damage calls for a new wheel.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Pro Comp Alloy Wheels 17x9 6x5.5 on Amazon