Overview
The Pro Comp 73 Series Trilogy PXA5173-21070 is a 20 by 10 inch aluminum spoke wheel in satin black, with an 8 on 170 bolt pattern and an offset of -18. Pro Comp designed the 73 Series for sport utility trucks and SUVs that need a high offset for brake clearance.
Pro Comp Alloys are cast with low-pressure casting technology, which gives strength and a finished look. The 10 inch width and -18 offset together set how far the wheel sits outside the hub, which matters most on lifted trucks and sport utility vehicles. The spoke design and satin black finish are the main visible features, and the 20 inch diameter sets the tire size you can run. Satin black finishes are kept looking their best with regular washing.
Key features
- 20 inch diameter and 10 inch width
- 8 on 170 bolt pattern
- Center bore of 125
- Offset of -18 and backspacing of 4.75
- Spoke style in satin black
- Aluminum construction with low-pressure casting
Fitting a high offset wheel
Wheels with a negative offset, such as -18 here, move the mounting face outward. That places the barrel farther behind the hub, which can give more room for larger brake components. The outer edge then sits farther out, so fender and suspension clearance should be checked before driving.
Wider wheels also change how the tire loads the bearings and the steering components. Tire choice matters, since a wide wheel with a tall tire may not clear the suspension at full compression. Keep tire pressure within the rating for the tire, and check the sidewalls for rubbing after the first few drives.
- Check tire clearance at full lock
- Inspect the tire for rubbing on the inner fender
- Check wheel bearing play after large tire changes
- Recheck lug torque after a few drives
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA5173-21070 |
| Series | 73 Series Trilogy |
| Diameter | 20 inches |
| Width | 10 inches |
| Bolt pattern | 8 on 170 |
| Center bore | 125 |
| Offset | -18 |
| Backspacing | 4.75 |
| Style | Spoke |
| Finish | Satin black |
| Construction | Aluminum |
Vehicle fitment
The wheel is universal fit, but a wheel must match the hub’s bolt pattern, center bore and offset, so fitment depends on your vehicle’s dimensions. Compare the 8 on 170 pattern, the 125 center bore and the -18 offset with your hub and brake clearance before ordering.
No specific vehicles are named for this wheel. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A negative offset of -18 moves the wheel face outward, so check tire clearance at the fenders and suspension once the wheel is mounted. Whether a center cap is supplied should be confirmed before mounting.
What’s included
One Pro Comp 73 Series Trilogy wheel, 20 by 10 inches, satin black.
Not included: Center cap supply should be confirmed before mounting.











