Select your vehicle

Pro Comp 69 Series Vintage, 16x10 Wheel with 6 on 5.5 Bolt Pattern – Polished – 1069-6183

Pro Comp Alloy Wheels

Check today’s price on Amazon

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Pro Comp PXA1069-6183: 16×10 polished aluminum Vintage wheel, 69 Series Classic
  • 6 on 5.5 bolt pattern, center bore 72, offset -25, backspacing 4.5
  • Holes style face, low-pressure cast construction
  • No vehicle is named for this wheel

Description

Overview

The Pro Comp PXA1069-6183 is a 16×10 polished aluminum wheel from the Pro Comp 69 Series Vintage line, with a Holes style face and a 6 on 5.5 bolt pattern. It is sold as one wheel with a center bore of 72 and an offset of -25.

Vintage alloys are cast with low-pressure technology and finished for a look that pairs style with light weight. This 16×10 version has a 4.5 backspacing and a high offset construction suited to trucks and SUVs that go off road.

Key features

  • Low-pressure cast aluminum
  • Holes style face
  • 16-inch diameter, 10-inch width
  • 6 on 5.5 bolt pattern
  • Center bore of 72
  • Offset -25 with 4.5 backspacing

On the trail

Off-road use puts side loads on the rim edge and bead, so tire pressure and driving style matter as much as the wheel itself. Lower pressures help the bead stay seated on rocks, but a rim strike can still bend the edge. Inspect the rim after each hard session and look for flat spots or cracks.

A polished finish shows scratches and brake dust more than darker finishes, so a light clean after trail use keeps it looking good. Keep the hub bore and lug seats free of dirt when remounting, since grit there can loosen nuts over time. Carry a spare valve core and a basic gauge so pressure can be checked in the field.

  • Check the rim edge after rock contact
  • Keep the bore and seats clean
  • Re-torque lug nuts after the first drives

Specifications

Brand Pro Comp Alloy Wheels
Part number PXA1069-6183
Series 69 Series Vintage (Classic)
Style Holes
Construction Aluminum
Finish Polished
Diameter 16 inches
Width 10 inches
Bolt pattern 6 on 5.5
Center bore 72
Offset -25
Backspacing 4.5

Vehicle fitment

Fit is set by hub measurements, not by a named model. The 6 on 5.5 pattern and 72 center bore come first, then the -25 offset should be checked against the brake caliper and fender.

Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Use a six-lug hub measuring 5.5 across the bolt holes. Because the center bore is 72, confirm the hub pilot fits that size, and test-fit the -25 offset rim with the tire before the vehicle goes off road.

What’s included

One 16×10 aluminum wheel. Plan for lug nuts and a center cap that suit the six-lug hub.

SKU: PXA1069-6183 Categories: ,

Questions & Answers

What bolt pattern does the PXA1069-6183 use?

It uses a 6 on 5.5 bolt pattern with a 72 center bore. The offset is -25 and the backspacing is 4.5. Confirm these figures against the hub.

Is this polished 16x10 wheel a Holes style?

Yes. It is a polished aluminum wheel with the Holes style face from the 69 Series Classic range. Its 6 on 5.5 spacing, 72 center bore and -25 offset decide fit before the finish matters.

Are lug nuts included with the PXA1069-6183?

No. The wheel ships alone, so lug nuts and a center cap need to come from your own stock or a separate purchase. Count the studs on your hub and choose nuts that seat correctly on this rim before installing.

Can a bent rim be repaired for trail use?

Most bent aluminum rims are better replaced than repaired, because heat and hammering can weaken the metal. A small bend that does not affect the bead seat may be checked by a wheel shop first. Any rim with cracks should be taken out of service.

Find it on Amazon

See today’s price and delivery options on Amazon, and check out with your Amazon account.

Check today’s price on Amazon