Overview
The Pro Comp 34 Series Rockwell 17×8.5 wheel, part number PXA5034-78583, is a 17-inch aluminum spoke wheel with an 8.5-inch width. It uses a 6 on 5.5 bolt pattern and a satin black finish, which the series listing describes as 34 Series Rockwell satin black.
The 34 Series Rockwell is built from low-pressure cast aluminum. This version has an 83 center bore, a 0 offset and a 4.75 backspacing. It is universal fit with no vehicle named, so check the 6 on 5.5 bolt pattern and 83 center bore against the hub first.
Key features
- Low-pressure cast aluminum
- 17-inch diameter, 8.5-inch width
- 6 on 5.5 bolt pattern
- Center bore 83
- Offset 0, backspacing 4.75
- Satin black spoke finish
Caring for a satin black finish
Satin black has a flat, non-glossy surface that shows different marks than a gloss finish. Road grime, brake dust and tar tend to settle into the surface, so routine washing with a pH-neutral soap keeps the color even. Harsh solvents and abrasive polishes can leave shiny patches that change the look of the spoke face over time.
Inspecting the wheel is part of ownership. Look for cracks around the spoke roots and the bolt holes, and for bent or chipped edges after rough trail use. A wheel showing a crack should be taken out of service and replaced rather than repaired at home. Keep an eye on the bead seat and the valve area as well.
- Wash with pH-neutral soap
- Avoid abrasive pads on spokes
- Check spoke roots for hairline cracks
- Inspect after impacts or hard landings
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA5034-78583 |
| Wheel diameter | 17 inches |
| Wheel width | 8.5 inches |
| Bolt pattern | 6 on 5.5 |
| Center bore | 83 |
| Offset | 0 |
| Backspacing | 4.75 |
| Style | Spoke |
| Finish | Satin black |
| Construction | Aluminum |
| Series | 34 Series Rockwell |
Vehicle fitment
Pro Comp does not assign this wheel to a vehicle. It is universal fit, so the 6 on 5.5 hub and 83 center bore are the measurements that decide whether it mounts correctly.
Confirm your vehicle’s year, model and trim before ordering.
Satin black is the finish, and the wheel is a cast aluminum spoke design. Its 6 on 5.5 pattern and 83 center bore determine whether it mounts to a given hub, and the 0 offset and 4.75 backspacing set where the wheel face sits relative to the brakes.
What’s included
One satin black 17×8.5 wheel is supplied. Center caps and lug nuts are excluded.











