Overview
The Pro Comp PXA1069-5885 is a 15×8 polished aluminum wheel from the Pro Comp 69 Series Vintage line, with a Holes style face and a 5 on 5.5 bolt pattern. It is sold as one wheel with a center bore of 108 and an offset of -19.
The Vintage line uses low-pressure casting to build a light wheel with a durable finish and a classic look. This polished 8-inch-wide version has a backspacing of 3.75, which places the rim behind the mounting face. Its high offset design is intended to help with brake clearance.
Key features
- Low-pressure cast aluminum
- Holes style face
- 15-inch diameter, 8-inch width
- 5 on 5.5 bolt pattern
- Center bore of 108
- Offset -19 with 3.75 backspacing
Tire width and wheel fit
Tire width should suit the rim, since a tire that is too wide or too narrow for an 8-inch rim changes the sidewall shape and road feel. Tire shops usually check the bead seat and the rated width range before mounting, which helps the tire sit square on the rim.
Five-lug hubs with 5.5 spacing appear on several light trucks and SUVs. The center bore should seat on the hub pilot without forcing, and a tight fit is better judged by sight than by pushing the wheel on. Rim offset also changes how the tire sits against the inner fender and caliper.
- Match tire width to the 8-inch rim
- Clean the hub face before mounting
- Recheck lug torque after the first trip
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | PXA1069-5885 |
| Series | 69 Series Vintage (Classic) |
| Style | Holes |
| Construction | Aluminum |
| Finish | Polished |
| Diameter | 15 inches |
| Width | 8 inches |
| Bolt pattern | 5 on 5.5 |
| Center bore | 108 |
| Offset | -19 |
| Backspacing | 3.75 |
Vehicle fitment
No vehicle is named for this wheel. Universal fit on the specifications does not tie the wheel to a model. A five-lug hub at 5.5 with a 108 center bore is required, followed by a check of the -19 offset against the vehicle.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Only a five-lug hub at 5.5 accepts this wheel, and the center bore should seat on the hub pilot. Test-fit with the tire mounted before the vehicle sees trail use. Five lug holes on a 5.5 spacing must line up with the hub exactly, and the 108 center bore should seat on the hub pilot. The 8-inch width and -19 offset set the tire position, so test-fit with the planned tire. The 3.75 backspacing places the inner lip behind the mounting face, which affects caliper and suspension room. Choose a tire width suited to an 8-inch rim and check fender clearance at full lock. Measuring the hub before ordering avoids a wheel that will not center or mount.
What’s included
One 15×8 aluminum wheel. Lug nuts and a center cap should be checked against what arrives before the install begins.











