Overview
The Pro Comp 4 Inch Lift Kit with ES9000 Shocks, part number K2092B, is a 4-inch stage 2 lift for 2013-2018 Ram 3500 trucks. It uses a radius arm suspension, with coil springs and replacement radius arms at the front. The lift height range is 3 to 4.99 inches.
The rear uses lift blocks and U-bolts. The kit includes a pitman arm steering correction, front sway bar links, bump stop extensions and brake line extension brackets. ES9000 shocks come with the kit, and the front shocks are the reused OEM units.
Key features
- 4-inch stage 2 lift
- Radius arm suspension type
- Coil springs with replacement radius arms
- Pitman arm steering correction
- Front sway bar links and bump stop extensions
- Brake line extension brackets
- Rear lift blocks and U-bolts
Alignment after a radius arm lift
Radius arms set the front axle’s position under braking and acceleration, so replacing them changes caster and toe settings. A professional alignment after installation keeps tire wear even and steering predictable. Many owners also check the pitman arm and steering linkage at the same visit, since correcting steering geometry on a lifted truck affects how the wheels track.
Trucks with a larger lift often need more attention to driveline angles and brake hose length. Inspect the brake lines and sway bar end links after the first few drives, and recheck fasteners once the suspension has settled. Bump stop extensions limit travel at full compression, so they should be checked for clearance against the tires and frame.
- Set alignment once the new arms and springs are installed
- Check the pitman arm and steering linkage for free movement
- Recheck torque on control and sway bar fasteners after the first drives
- Inspect brake lines for stretch at full suspension travel
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K2092B |
| UPC | 700006823761 |
| Lift height | 4 inches, stage 2 |
| Lift height range | 3 to 4.99 inches |
| Suspension type | Radius arm or radius arm brackets |
| Front lift | Coil springs and replacement radius arms |
| Steering correction | Pitman arm |
| Rear lift | Lift blocks and U-bolts |
| Shocks | ES9000, included with the kit. The front shocks are the reused OEM units. |
| Fitment | Direct fit |
Vehicle fitment
It fits the 2013-2018 Ram 3500 in the Big Horn, Laramie, Laramie Limited, Laramie Longhorn, Limited, Lone Star, SLT, ST and Tradesman trims. Ram 2500 and 1500 trucks, and 2012 and earlier or 2019 and later Ram 3500 models, are not covered. Confirm your vehicle’s year, model and trim before ordering.
Ram 2500 and 1500 trucks, and 2012 and earlier or 2019 and later Ram 3500 models, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Replacement radius arms change alignment and steering geometry, so have the alignment and steering checked after installation.
What’s included
The kit includes front coil springs, replacement radius arms, front sway bar links, bump stop extensions, a pitman arm steering correction, brake line extension brackets, and rear lift blocks with U-bolts. ES9000 shocks come with the kit.









