Overview
The Pro Comp 6 Inch Lift Kit with ES9000 Shocks, part number K2084B, is a 6-inch knuckle lift for the 2012-2013 Ram 1500 in 4WD form. It is a 6-inch stage 1 lift with a lift height range of 5 to 6.99 inches.
The kit uses CNC machined knuckles and redesigned crossmembers, which are designed for minimal toe change during suspension travel. The system is designed to work with the factory electronic stability program. The rear lift is made with spacers, and the front shocks are reused from the truck while ES9000 shocks are fitted at the rear.
Key features
- 6-inch stage 1 knuckle lift
- CNC machined knuckles
- Redesigned crossmembers
- Crossmember drop brackets
- Extended sway bar links
- Driveline spacer
- Stainless steel braided brake lines
- Rear ES9000 shocks
Knuckle lift geometry
A knuckle lift replaces the front spindle geometry instead of raising the truck with spacers, so steering and driveline are affected in a different way than with a coil or block lift. Toe, camber and caster should be checked against the new knuckles, and the tie rod and steering linkage should be inspected for play.
Off-road use puts extra stress on crossmember bolts, knuckle fasteners and sway bar link ends. After rough trails, look for loosened hardware, cracked bushings and fluid leaks from the braided lines. Keep a torque wrench and the installation sequence handy for follow-up checks.
- Recheck crossmember bolts after the first off-road trip
- Inspect braided brake lines for chafing near the knuckle
- Look for uneven tire wear that suggests a toe issue
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | K2084B |
| UPC | 70000676689 |
| Lift height | 6 inches, stage 1 |
| Lift height range | 5 to 6.99 inches |
| Suspension type | Knuckle |
| Steering correction | Knuckles |
| Rear lift | Spacers |
| Rear shocks | ES9000 |
| Front shocks | Reuse OEM |
| Finish | Black |
| Drivetrain | 4WD |
Vehicle fitment
It fits the 2012 and 2013 Ram 1500 in 4WD form. Confirm the trim levels of your truck before ordering.
Two-wheel-drive Ram 1500 trucks and model years outside 2012-2013 are not covered by this kit. Check the year, model and trim against your vehicle before ordering.
Installation notes
New knuckles and redesigned crossmembers replace factory front components, so have the alignment and driveline angles checked after installation. The system is designed to work with factory stability control.
What’s included
The kit includes CNC machined knuckles, redesigned crossmembers, crossmember drop brackets, extended sway bar links, a driveline spacer, stainless steel braided brake lines, rear spacers, and rear ES9000 shocks.






























